Frequently asked questions
Here are some frequently asked questions for instant access Build Your Own (BYO).
Table: Frequently asked questions
Frequently asked question | Answer |
|---|
How can I enable instant access file browsing (for file download and restore) on BYO after the storage is configured or upgraded without the docker installed? | Perform the steps in the following order: Install the required docker version. Start using the Instant Access feature. For example, you can download files, restore files, and so on.
|
How can I enable the VMware instant access feature on BYO after storage is configured or upgraded without the nginx service installed? | Perform the steps in the following order: Install the required nginx service version. Ensure that the new BYO nginx configuration entry: /etc/nginx/conf.d/byo.conf is part of the HTTP section of the original: /etc/nginx/nginx.conf file. Run the command: /usr/openv/pdde/vpfs/bin/vpfs_config.sh --configure_byo
|
How can I resolve the following issue in the vpfs-config.log file that is raised from:
Verifying that the MSDP REST API is available via https on port 10087 | Perform the steps in the following order: Install the policycoreutils and policycoreutils-python packages through yum tool. Add the following rules that SELinux requires for Nginx to bind on the 10087 port. Run the following command: /usr/openv/pdde/vpfs/bin/vpfs_config.sh --configure_byo
|
Instant Access for BYO uses a self-signed certificate by default and only supports *.pem external certificate. How do I replace it with a certificate signed by external CA (*.pem certificate), if required? | To configure the external certificate, perform the following steps. If the new certificate is already generated (the certificate must contain long and short host names for the media server), go to step 4. Create the RSA public or private key pair. Create a certificate signing request (CSR). The certificate must contain long and short host names for the media server. The External Certificate Authority creates the certificate. Replace <PDDE Storage Path>/spws/var/keys/spws.cert with the certificate and replace <PDDE Storage Path>/spws/var/keys/spws.key with the private key. Run the following command to reload the certificate: /usr/openv/pdde/vpfs/bin/vpfs_config.sh --configure_byo
|
How can I disable media automount for the instant access livemount share in gnome? If the automount is enabled, the source folder is mounted from the livemount share in gnome and smaller disks appear. In this scenario, the instant access feature does not work properly. The mounted disk content source is from the .../meta_bdev_dir/... folder under livemount share, while the mount target is in the /run/media/... folder. | Follow the guideline to disable the gnome automount: https://access.redhat.com/solutions/20107 |
How can I resolve the following issue in the /var/log/vpfs/vpfs-config.log file? **** Asking the NetBackup Webservice to trust the MSDP webserver (spws) ****
/usr/openv/netbackup/bin/nblibcurlcmd failed (1):
| Perform the steps in the following order: Ensure that your NetBackup primary server is up and there is no firewall blocking the connection between the NetBackup primary server and storage server. Run the following command on storage server to verify the connection status: /usr/openv/netbackup/bin/bpclntcmd -pn After the NetBackup primary server is up and connection between the NetBackup primary server and storage server is allowed, run the following command: /usr/openv/pdde/vpfs/bin/vpfs_config.sh --configure_byo
|
