To install NetBackup master server software

1. Log in to the server as root.
2. Navigate to where the ESD images (downloaded files) reside and enter the command shown:

   ./install

3. When the following message appears press Enter to continue:

   Veritas Installation Script
   Copyright 1993 - 2016 Veritas Corporation, All Rights Reserved.
   
   
           Installing NetBackup Server Software
   
   
   Please review the VERITAS SOFTWARE LICENSE AGREEMENT located on
   the installation media before proceeding.  The agreement includes
   details on the NetBackup Product Improvement Program.
   
   For NetBackup installation and upgrade information specific to your
   platform and to find out if your installed EEBs or hot fixes are
   contained in this release, check out the Veritas Services and 
   Operations Readiness Tools (SORT) Installation and Upgrade Checklist 
   and Hot fix and EEB Release Auditor, respectively, at 
   https://sort.veritas.com/netbackup.
   
   ATTENTION!  To help ensure a successful upgrade to NetBackup 8.2,
   please visit the NetBackup 8.x Upgrade Portal:
   http://www.veritas.com/docs/000115678.
   
   Do you wish to continue? [y,n] (y)

4. When the following message appears press Enter to continue:

   Is this host a master server? [y/n] (y)

5. If you need to perform a disaster recovery of your master server, select Y when prompted. Press Enter for the default N.

   Do you want to do a disaster recovery on this master server? [y/n] (n)

   The disaster recovery process requires additional steps and information that is not covered in this manual. More information is available.

   NetBackup Troubleshooting Guide

6. When the following question appears, enter the fully qualified path that contains your customer registration key.

   Please enter the fully qualified path containing your customer registration key file, or enter q to quit the install script.

   During install and upgrade to NetBackup 8.1.2, please allow the installer to copy the veritas_customer_registration_key.json file to its final destination. NetBackup can set the file permission and ownership correctly through this process. If you place the file onto your systems outside of the install or the upgrade process, the process may not work correctly.

7. For the NetBackup installation location, enter the appropriate platform information as follows:

   • When the following question appears, press Enter to accept the default (y).

     The NetBackup and Media Manager software is built
     for use on <platform> hardware. Do you want to install
     NetBackup and Media Manager files? [y,n] (y)
     

   • When the following question appears, select where to install NetBackup and Media Manager software:

     NetBackup and Media Manager are normally
     installed in /usr/openv.
     Is it OK to install in /usr/openv? [y,n] (y)
     

     The path displayed for Solaris is /opt/openv.

     To accept the default (y), press Enter.

     To change the installation location, type n and press Enter. Then enter the appropriate destination.

     Additional information about installation folder restrictions is available.

     See Restrictions on the NetBackup installation directory.

8. Enter the Netbackup server or Enterprise server License.
9. Type y, then follow the prompts to add license keys for other NetBackup options and agents.

   Although you can add licenses later, you should enter them now. If you add any licenses later through the NetBackup Administration Console, you must restart the console.

10. After all licenses are entered, type q to quit the License Key Utility and complete the server software installation.
11. Verify or enter the correct computer name when prompted by the following message:

    Installing NetBackup Enterprise Server version: 8.2
    If this machine will be using a different network interface than 
    the default (name), the name of the preferred interface 
    should be used as the configured server name. If this machine 
    will be part of a cluster, the virtual name should be used as the 
    configured server name.
    The domainname of your server appears to be "domain". You 
    may choose to use this domainname in your configured NetBackup 
    server name, or simply use "name" as the configured 
    NetBackup server name.
    Would you like to use "name.domain" as the configured NetBackup server
    name of this machine? [y, n] (y)

    Note:

    Incorrect information for the domain name results in failures during the configuration of Authentication Broker and NetBackup Access Controls. To correct this problem, use the bpnbaz -configureauth command to configure Authentication Broker. More information about the bpnbaz -configureauth command is available.

    NetBackup Commands Reference Guide

    • To accept the displayed (default) name, press Enter.

    • To change the displayed (default) name, type n and enter the name that you want.

    • For a clustered NetBackup server, enter the virtual name for the NetBackup server and not the actual local host name.

12. Identify or verify the master server by answering the following question when it appears:

    Is <name> the master server? [y, n] (y)

    • To accept the displayed name (which is the name that you identified in the previous step), press Enter.

    • If you entered a virtual name for the server in the previous step, the installation script presents the following question:

      Is this server part of a cluster installation?

      If the answer is yes, press y and answer the series of cluster configuration questions that appear.

      If the answer is no, press n.

13. Identify whether there are any media servers for this master server by answering the following question when it appears:

    Do you want to add any media servers now? [y, n] (n)

    • If there are no media servers for this master server, press Enter and proceed to the next step.

    • If there are media servers for this master server, type y and enter the name of each media server.

      When you enter the media server names, you must enter the computer name and the domain name. For example:

      alpha.domain.com
      	

      Where alpha is the computer name and domain.com is the domain name.

      The media server names that you enter here are added to the bp.conf file on the master server, automatically. After you install the media server software later, the master server can then communicate with the media servers immediately.

    • To add a media server to an existing and an operational NetBackup environment, you cannot use the procedures in this guide. For complete details on how to add a media server to an existing and an operational NetBackup environment, see the NetBackup Administrator's Guide, Volume II.

14. When the following message appears, press Enter and accept the default name of the EMM server. You must configure EMM on the master server. All master servers must have their own EMM configuration. Remote EMM or shared EMM is no longer supported.

    NetBackup maintains a centralized catalog (separate from the 
    image catalog) for data related to media and device 
    configuration, device management, storage units, hosts and host 
    aliases, media server status, NDMP credentials, and other 
    information. This is managed by the Enterprise Media Manager 
    server.
    Enter the name of the Enterprise Media Manager (default: <name>)

15. Answer the following question when it appears:

    Do you want to start the NetBackup job-related processes so backups and 
    restores can be initiated? [y, n] (y)

    • If you have (or want to have) a clustered NetBackup server, type n.

    • For non-clustered installations, press Enter to accept the default answer (y) and start the NetBackup processes and the EMM server.

      You must start these processes now because the EMM server must be running when you install any media servers later.

16. For a clustered NetBackup master server, repeat these steps on every node on which you want to run NetBackup.
17. (Conditional) On a clustered NetBackup master server, you must obtain the Certificate Authority certificate and the host certificate for each inactive node. More information is available:

    See Generate a certificate on the inactive nodes of a clustered master server.

18. (Conditional) If you use cloud storage in your NetBackup environment, you must update your cloud configuration file. More information is available.

    See Update cloud configuration file on the master server immediately after install or upgrade to NetBackup 8.2.

19. After your initial installation is complete, you can install any other NetBackup add-on products (such as language packages).
20. (Conditional) If you use an external certificate authority (ECA) in your environment, configure the ECA now. More information is available:

    https://www.veritas.com/support/en_US/article.100044300

21. Complete the NetBackup installation as indicated.

    See Continuing with NetBackup software installation.