Creating tape drive pass-through device files
On media servers, NetBackup creates pass-through paths for tape drives automatically. However, you can create them manually.
NetBackup also uses the tape drive pass-through device files for SAN Client.
Use one of the following two procedures:
Create pass-through tape drive device files
Create SAN client pass-through device files
To create pass-through tape drive device files
- Determine the devices that are attached to the SCSI bus by using the HP-UX ioscan -f command, as follows:
ioscan -f Class I H/W Path Driver S/W State H/W Type Description ================================================================= ext_bus 7 0/7/0/ c720 CLAIMED INTERFACE SCSI C896 Fast Wide LVD target 10 0/7/0/1.0 tgt CLAIMED DEVICE tape 65 0/7/0/1.0.0 stape CLAIMED DEVICE QUANTUM SuperDLT1 target 11 0/7/0/1.1 tgt CLAIMED DEVICE tape 66 0/7/0/1.1.0 stape CLAIMED DEVICE QUANTUM SuperDLT1 target 12 0/7/0/1.2 tgt CLAIMED DEVICE autoch 14 0/7/0/1.2.0 schgr CLAIMED DEVICE ADIC Scalar 100 target 13 0/7/0/1.3 tgt CLAIMED DEVICE autoch 19 0/7/0/1.3.0 schgr CLAIMED DEVICE IBM ULT3583-TL target 14 0/7/0/1.4 tgt CLAIMED DEVICE tape 21 0/7/0/1.4.0 atdd CLAIMED DEVICE IBM ULT3580-TD1 target 15 0/7/0/1.5 tgt CLAIMED DEVICE tape 19 0/7/0/1.5.0 atdd CLAIMED DEVICE IBM ULT3580-TD1
This example output shows the following:
The robotic control for an ADIC Scalar 100 library is on a SCSI bus with an instance number of 7. The SCSI ID is 2, and the LUN is 0. The robotic control for an IBM ULT3583-TL library is on the same SCSI bus at SCSI ID 3 and LUN 0.
The ADIC library contains two Quantum Super DLT drives. One has a SCSI ID of 0 and a LUN of 0. The other has a SCSI ID of 1 and a LUN of 0.
The IBM library contains two IBM Ultrium LTO drives. One has a SCSI ID of 4 and a LUN of 0. The other has a SCSI ID of 5 and a LUN of 0.
Use the IBM atdd driver when you configure IBM tape drives on HP-UX. Configure atdd and BEST device paths according to the IBM driver documentation. Do not configure atdd for robotic control of IBM robots. For the latest recommended atdd driver version from IBM, check the Veritas support Web site.
- Create the pass-through device files for the tape drives, as follows:
cd /dev/sctl /usr/sbin/mknod c7t0l0 c 203 0x070000 /usr/sbin/mknod c7t1l0 c 203 0x071000 /usr/sbin/mknod c7t4l0 c 203 0x074000 /usr/sbin/mknod c7t5l0 c 203 0x075000
When you use the HP-UX mknod command for tape drives, the target is the SCSI ID of the tape drive. It is not the SCSI ID of the robotic control.
The previous commands create the following pass-through device files.
/dev/sctl/c7t0l0 /dev/sctl/c7t1l0 /dev/sctl/c7t4l0 /dev/sctl/c7t5l0
Although the pass-through device files for tape drives are used during NetBackup operation, they are not used during NetBackup configuration. During NetBackup tape drive configuration, use the following device files to configure the tape drives.
/dev/rmt/c7t0d0BESTnb /dev/rmt/c7t1d0BESTnb /dev/rmt/c7t4d0BESTnb /dev/rmt/c7t5d0BESTnb
To create SAN client pass-through device files
- Determine the devices that are attached to the SCSI bus by using the HP-UX ioscan -f command, as follows:
ioscan -f Class I H/W Path Driver S/W State H/W Type Description ================================================================================= ext_bus 9 0/3/1/0.1.22.255.0 fcd_vbus CLAIMED INTERFACE FCP Device Interface target 4 0/3/1/0.1.22.255.0.0 tgt CLAIMED DEVICE tape 6 0/3/1/0.1.22.255.0.0.0 stape CLAIMED DEVICE ARCHIVE Python tape 7 0/3/1/0.1.22.255.0.0.1 stape CLAIMED DEVICE ARCHIVE Python
This example output shows that the instance number of the Fibre Channel HBA is 9. It also shows that the target mode drivers on the Fibre Transport media server appear as ARCHIVE Python devices. One has a SCSI ID of 0 and a LUN of 0; the other has a SCSI ID of 0 and a LUN of 1.
- Determine the character major number of the sctl driver by using the following command:
lsdev -d sctl Character Block Driver Class 203 -1 sctl ctl
The output from this command shows that the character major number for the sctl driver is 203.
- Create the pass-through device files, as follows:
cd /dev/sctl /usr/sbin/mknod c9t0l0 c 203 0x090000 /usr/sbin/mknod c9t0l1 c 203 0x090100
The following describes the device file name:
c9defines the instance number of the interface card.t0defines the SCSI ID (the target).l1defines the LUN (the first character is the letter "l").
- Verify that the device files were created, as follows:
# ls -l /dev/sctl total 0 crw-r--r-- 1 root sys 203 0x090000 Nov 1 13:19 c9t0l0 crw-r--r-- 1 root sys 203 0x090100 Nov 1 13:19 c9t0l1