SLP Parameters properties

The SLP Parameters properties in the NetBackup Administration Console allow administrators to customize how storage lifecycle policies are maintained and how SLP jobs run. These properties apply to the SLPs of the currently selected master servers.

Figure: SLP Parameters dialog box

Change the parameters in either the Host Properties or use the command line. Whenever a storage lifecycle policy parameter is changed from the default, the change creates the nbcl.conf configuration file.

The nbcl.conf file is found in the following locations. It is present only if the default of any parameter has been changed.

On Windows:
install_path\NetBackup\var\global\nbcl.conf
On UNIX:
/usr/openv/var/global/nbcl.conf

To use the command-line method, use the nbgetconfig and the nbsetconfig commands to change the defaults. For information about these commands, see the NetBackup Commands Reference Guide.

Table: SLP Parameters describes the SLP Parameters and the default of each. It also lists the configuration options and the syntax to use with the command-line method.

Use the drop-down menu in the Units column to change the units of measurement for size or time.

Table: SLP Parameters

Property	Description
Minimum size per duplication job	The smallest batch size that can run as a single duplication job. The job does not run until enough images accumulate to reach this minimum batch size or until the Force interval for small jobs time is reached. Minimum: 1 kilobyte; no maximum size. Default: 8 gigabytes. Configuration option default: SLP.MIN_SIZE_PER_DUPLICATION_JOB = 8 GB
Maximum size per duplication job	The largest batch size that can run as a single duplication job. Minimum: 1 kilobyte; no maximum size. Default: 100 gigabytes. Configuration entry default: SLP.MAX_SIZE_PER_DUPLICATION_JOB = 100 GB
Maximum size per A.I.R. replication job	The largest batch size that can run as a single job for Auto Image Replication. Minimum: 1 kilobyte; no maximum size. Default: 100 gigabytes. Configuration entry default: SLP.MAX_SIZE_PER_BACKUP_REPLICATION_JOB = 100 GB
Maximum images per snapshot replication job	The largest number of images in a single batch that can run as a single job. Default: 50 images, with no minimum number or maximum number. Use this parameter with the Limit I/O streams disk pool option which limits the number of jobs that can run concurrently to each volume in the disk pool. Configuration entry default: SLP.MAX_IMAGES_PER_SNAPSHOT_REPLICATION_JOB = 50
Minimum images per A.I.R. Import job	The fewest number of images in a single batch that can run as an Auto Image Replication import job. The job does not run until either the minimum size is reached or the Force interval for small jobs time is reached. Minimum: 1 image; no maximum number of images. Default: 1 image. Configuration entry default: SLP.MIN_IMAGES_PER_IMPORT_JOB = 1
Maximum images per A.I.R. Import job	The largest number of images in a single batch that can run as an Auto Image Replication import job. Minimum: 1 job; no maximum number of images. Default: 250 images. Configuration entry default: SLP.MAX_IMAGES_PER_IMPORT_JOB = 250
Force interval for small jobs	The age that the oldest image in a batch must reach after which the batch is submitted as a duplication job. This value prevents many small duplication jobs from running at one time or running too frequently. It also prevents NetBackup from waiting too long before it submits a small job. Default: 30 minutes, with no minimum number or maximum number. Configuration entry default: SLP.MAX_TIME_TIL_FORCE_SMALL_DUPLICATION_JOB = 30 MINUTES
Job submission interval	Indicates the frequency of the job submission for all operations. No minimum interval or maximum interval. Default: 5 minutes. By default, all jobs are processed before more jobs are submitted. Increase this interval to allow NetBackup to submit more jobs before all jobs are processed. Set the interval when the list of available images is scanned for those that can be batched together and jobs submitted. A shorter interval allows for a better response to changing system workloads at the cost of increased processing. Configuration entry default: SLP.JOB_SUBMISSION_INTERVAL = 5 MINUTES
Image processing interval	The number of minutes between image-processing sessions. Set the interval when newly created images are recognized and set up for SLP processing. Default: 5 minutes. Configuration entry default: SLP.IMAGE_PROCESSING_INTERVAL = 5 MINUTES
Cleanup interval	The time between when a job finishes and before NetBackup removes the job artifacts for the completed job. No minimum interval or maximum interval. Default: 24 hours. Configuration entry default: SLP.CLEANUP_SESSION_INTERVAL = 24 HOURS
Extended image retry interval	The amount of time to wait before an unsuccessful operation is added to the first job that runs after the delay. (This applies to all SLP jobs.) The extra time gives the administrator additional time to solve a problem that prevents job completion. No minimum interval or maximum interval. Default: 2 hours. Configuration entry default: SLP.IMAGE_EXTENDED_RETRY_PERIOD = 2 HOURS
Unused SLP definition version cleanup delay	Concerns the deletion of SLP versions where a more recent version exists. The setting controls how long a version must be inactive before NetBackup deletes it. Default: 14 days. Configuration entry default: SLP.VERSION_CLEANUP_DELAY = 14 DAYS See Deleting old storage lifecycle policy versions.
Tape resource multiplier	Limits the number of concurrently active duplication jobs that can access a single tape media storage unit to xx times the number of available drives. Allows tuning to avoid overloading the Resource Broker, yet makes sure that the devices are not idle. No minimum multiplier or maximum multiplier. Default: 2 (multiply access to the write drives by two). Configuration entry default: SLP.TAPE_RESOURCE_MULTIPLIER = 2
Disk resource multiplier	Limits the number of concurrently active duplication jobs that can access a single disk storage unit to xx times the number of available drives. Allows tuning to avoid overloading the Resource Broker, yet makes sure that the devices are not idle. No minimum multiplier or maximum multiplier. Default: 2 (multiply access to the write drives by two). Configuration entry default: SLP.DISK_RESOURCE_MULTIPLIER = 2
Group images across SLPs	If this parameter is set to Yes (default), multiple SLPs of the same priority can be processed in the same job. If No, batching can occur only within a single SLP. Configuration entry default: SLP.DUPLICATION_GROUP_CRITERIA = 1 Configuration entry for no, do not allow batching:SLP.DUPLICATION_GROUP_CRITERIA = 0
Window close buffer time	Sets the amount of time before a window closes when NetBackup does not submit new jobs using that window. Minimum 2 minute; maximum: 60 minutes. Default: 15 minutes. Configuration entry default: SLP.WINDOW_CLOSE_BUFFER_TIME = 15 MINUTES
Deferred duplication offset time	For deferred operations, jobs are submitted x time before the source copy is due to expire. Default: 4 hours. Configuration entry default: SLP.DEFERRED_DUPLICATION_OFFSET_TIME = 4 HOURS
Auto create A.I.R. Import SLP	Used for Auto Image Replication, indicates whether an SLP (that contains an Import operation) is created automatically in the target domain if no SLP is configured there. Default: Yes, an SLP is created in the target domain. Configuration entry default: SLP.AUTO_CREATE_IMPORT_SLP = 1
How long to retry failed A.I.R. import jobs	How long NetBackup retries an Import job before it stops and deletes the record. After the initial four attempts, the retries become less frequent. Default: 0 (do not retry after the initial four attempts). Configuration entry default: SLP.REPLICA_METADATA_CLEANUP_TIMER = 0 HOURS
Pending A.I.R import threshold	How long NetBackup waits before it generates a notification that an Auto Image Replication copy is still in import pending state. After an Auto Image Replication copy has been replicated, NetBackup puts the source copy into import pending state. If the copy is in import pending state for the time period that this threshold sets, NetBackup generates a notification. Notifications are sent to the NetBackup error log and are visible in the Problems report. Notifications may also be sent to an email address, if specified. Default: 24 hours Configuration entry default: SLP.PENDING_IMPORT_THRESHOLD = 24 HOURS See About Auto Image Replication import confirmation.
Email address to receive notifications	The email address that receives pending A.I.R. import notifications. Default: None. Configuration entry format: SLP.NOTIFICATIONS ADDRESS = user@company.com

Command-line units of measurement for the SLP parameters

The abbreviations are case-insensitive for units of measurement.

The following abbreviations can be used where sizes are indicated:

bytes	kb	kilobyte	kilobyte(s)	kilobytes	mb	megabyte
megabyte(s)	megabytes	gb	gigabyte	gigabyte(s)	gigabytes	tb
terabyte	terabyte(s)	terabytes	pb	petabyte	petabyte(s)	petabytes

The following abbreviations can be used where units of time are indicated:

sec	second	second(s)	seconds	min	minute	minute(s)	minutes
hour	hour(s)	hours	day	day(s)	days	mon	month
month(s)	months	week	week(s)	weeks	year	year(s)	years

SLP Parameters properties

Feedback

Feedback