Silently upgrading NetBackup media server software on Linux
You can upgrade NetBackup Linux media servers with native installers. You can use either the NetBackup install script or your preferred installer method.
For Linux: rpm, yum, etc.
A successful installation or upgrade is recorded in the /usr/openv/pack/install.history file.
Caution:
You must remove the NetBackup Nutanix plug-in package before you upgrade NetBackup Red Hat and SUSE Linux with the native installers. Both the Nutanix plug-in and NetBackup install the same libraries to the same location, which results in a failure to upgrade. The upgrade fails with an install of package_name conflicts with file from package package_name error message.
Use the command that is shown to uninstall the plug-in before attempting the NetBackup upgrade.
rpm -e VRTSnbntnxahv*
To upgrade the Linux media server binaries using native installers:
- Create the NetBackup installation answer file (
NBInstallAnswer.conf) in the media server/tmpdirectory. More information about the answer file and its contents is available. - (Conditional) If your environment uses a NetBackup Certificate Authority, and the media server is already configured for NetBackup Certificate Authority, proceed to 4. Otherwise, populate
NBInstallAnswer.confwith the following required information:CA_CERTIFICATE_FINGERPRINT=fingerprint
Example (the fingerprint value is wrapped for readability):
CA_CERTIFICATE_FINGERPRINT=01:23:45:67:89:AB:CD:EF:01:23:45:67: 89:AB:CD:EF:01:23:45:67
Depending on the security configuration in your NetBackup environment, you may need to add the AUTHORIZATION_TOKEN option to the answer file. Additional information about the AUTHORIZATION_TOKEN option is available.
- (Conditional) If your environment uses an external certificate authority, and the media server is already configured for external certificate authority, proceed to 4. Otherwise, populate
NBInstallAnswer.confwith the following required information:ECA_CERT_PATH
Use this field to specify the path and the file name of the external certificate file. This field is required to set up an external certificate from a file.
ECA_TRUST_STORE_PATH
Use this field to specify the path and the file name of the file representing the trust store location. This field is required to set up an external certificate from a file.
ECA_PRIVATE_KEY_PATH
Use this field to specify the path and the file name of the file representing the private key. This field is required to set up an external certificate from a file.
ECA_KEY_PASSPHRASEFILE
Use this field to specify the path and the file name of the file that contains the passphrase to access the keystore. This field is optional and applies only when setting up an external certificate from a file.
ECA_CRL_CHECK_LEVEL
Use this field to specify the CRL mode. This field is required. Supported values are:
USE_CDP: Use the CRL defined in the certificate.
USE_PATH: Use the CRL at the path that is specified in ECA_CRL_PATH.
DISABLED: Do not use a CRL.
ECA_CRL_PATH
Use this field to specify the path to the CRL associated with the external CA certificate. This field is required only when ECA_CRL_CHECK_LEVEL is set to USE_PATH. If not applicable, leave this field empty.
- Additionally, you can add the optional parameters that are shown to the
NBInstallAnswer.conffile.Additional SERVER entries
More information about each option is available.
- Download the server package that matches your server platform to a system with sufficient space. Then extract the required server package.
Extract the contents of the server package file. Example:
For Linux Red Hat:
tar -xzvf NetBackup_11.1_LinuxR_x86_64.tar.gz
For Linux SuSE:
tar -xzvf NetBackup_11.1_LinuxS_x86_64.tar.gz
- Change to the directory for your desired operating system and copy packages to the media server.
Operating system directory:
For Linux Red Hat:
NetBackup_11.1_LinuxR_x86_64/linuxR_x86/anbFor Linux SuSE:
NetBackup_11.1_LinuxS_x86_64/linuxS_x86/anb
Copy server files to the computer to be installed.
Note:
The upgrade of the Java GUI and the JRE is optional. If you do not want them upgraded, omit the copy and the install of the
VRTSnbjavaandVRTSnbjrepackages.Remove the old Java GUI and JRE packages if you decide not to upgrade them.
Note:
The installation of the NetBackup DIrectIO package is optional. If you do not want it installed, omit the copy and the install of the
VRTSnbdirectiopackage.VRTSnbcfg.rpmVRTSnbclibs.rpmVRTSnbclt.rpmVRTSnbjava.rpmVRTSnbjre.rpmVRTSnbpck.rpmVRTSnbslibs.rpmVRTSnbdirectio.rpmVRTSnetbp.rpmVRTSpbx.rpmVRTSpddea.rpmVRTSpddes.rpmVRTSpddeu.rpm
- Install the Cohesity precheck package.
Linux: rpm - U VRTSnbpck.rpm
- (Conditional) If you are upgrading from pre-NetBackup 8.0, remove the old SYMC* packages. The example that is shown indicates the commands that are used to remove the SYMC RPM packages. This process preserves your NetBackup configuration.
rpm -e SYMCnbjava rpm -e SYMCpddea rpm -e SYMCnbclt rpm -e SYMCnbjre rpm -e SYMCpddes rpm -e SYMCnetbp
- Install the files in the order that is shown with the commands shown:
Note:
The upgrade of the Java GUI and the JRE is optional. If you do not want them upgraded, omit the copy and the install of the
VRTSnbjavaandVRTSnbjrepackages.Remove the old Java GUI and JRE packages if you decide not to upgrade them.
RedHat Linux
rpm -U VRTSpbx.rpm rpm -U VRTSnbclt.rpm rpm -U VRTSnbclibs.rpm rpm -U VRTSnbjre.rpm rpm -U VRTSnbjava.rpm rpm -U VRTSpddes.rpm rpm -U VRTSpddeu.rpm rpm -U VRTSpddea.rpm rpm -U VRTSnbcfg.rpm rpm -U VRTSnetbp.rpm rpm -U VRTSnbslibs.rpm
Note:
The
VRTSpddeipackage is no longer delivered in NetBackup 11.1. Remove this rpm and installlibguestfs.rpmandpython3-libguestfs.rpmif you want to continue to use Instant Access or malware scans of VM images.SuSE Linux
rpm -U VRTSpbx.rpm rpm -U VRTSnbclt.rpm rpm -U VRTSnbclibs.rpm rpm -U VRTSnbjre.rpm rpm -U VRTSnbjava.rpm rpm -U VRTSpddeu.rpm rpm -U VRTSpddea.rpm rpm -U VRTSpddes.rpm rpm -U VRTSnbcfg.rpm rpm -U VRTSnetbp.rpm rpm -U VRTSnbslibs.rpm
- You can remove the old versions of the Java GUI and the JRE if you no longer plan to use them.
Linux:
rpm -e VRTSnbjava.rpm
rpm -e VRTSnbjre.rpm
- You can remove the old versions of the NetBackup DirectIO package if you no longer plan to use it.
rpm -e VRTSnbdirectio.rpm