domain_Media
Table: domain_Media
OpsCenter Report Column | Description | Equivalent Column in IT Analytics |
|---|---|---|
masterServerId | This attribute specifies the Unique identifier for Primary Server in OpsCenter. | apt_v_server.server_id |
id | This attribute specifies a NetBackup Id that identifies the volume in six or fewer alphanumeric characters. NetBackup assigns the media Id when you add volumes or when you use a robot inventory to add volumes. | |
allocationTime | This attribute specifies the date and time when a piece of media was allocated for the first time or had its first backup written to it. Once the media expires, a new date and time is allocated when it is reused. | |
barcode | This attribute represents the full barcode as read by the physical robot and is used by NetBackup to ensure that the robot loads the correct volume. | apt_v_nbu_tape_media.barcode |
deleted | A yes/no property to indicate if the media has been deleted. 1(true) indicates deleted and 0(zero)(false)indicates not deleted. | |
density | This attribute specifies the type of tape media as defined by the backup application. For NetBackup this is also called the 'density' and specifies what types of drive the tape can go in. | |
expirationTime | This attribute specifies the expiration time of the media so that it gets assigned back to the pool for reuse. | apt_v_nbu_tape_media.expi ration_date |
hSize | This attribute specifies Optical media header size of a backup image. | apt_v_nbu_tape_media.optical_header_size |
imageCount | This attribute specifies the number of backup images on a given piece of tape media or disk pool. | apt_v_nbu_tape_media.nbr_of_images |
isCleaning | A yes/no property to indicate if the Drive is configured for cleaning. 1 (true) indicates drive is configured for cleaning and 0(zero)(false) indicates not configured for cleaning. | apt_v_nbu_tape_media.vendor_media_status |
isImported | A yes/no property to indicate if the backup media was imported. Imported media simply means that this particular backup domain did not originally write the data to the media. 1(true) indicates that this backup media was imported and 0(zero)(false) indicates this backup media was not imported. | apt_v_nbu_tape_media.vendor_media_status |
isMultipleRetLevelsAllowed | A yes/no property to indicate if a given piece of tape media will allow for multiple expiration dates. Multiple expiration dates means that the whole tape cannot be reused until the last backup has expired on the media.1(true) indicates that this tape media allows multiple expiration dates and 0(zero)(false) indicates it does not allow multiple expiration dates. 1(true) means multiplexing is allowed on this tape media and 0(zero)(false) means no multiplexing is allowed on this tape media. | |
isTotalCapacityEstimated | This attribute specifies capacity. Since capacity of a tape is often estimated using an algorithm. This specifies whether it was actually calculated, or provided exactly bythe DP product. | |
isValid | This attribute identifies if the media is valid or not. 1 specifies media is valid. | |
lastReadTime | This attribute specifies the date and time when the backup media was last read. | apt_v_nbu_tape_media.last_read |
lastRestoreTime | This attribute specifies the date and time when the backup media was last restored. | |
lastWriteTime | This attribute specifies the date and time when the backup media was last written to. | apt_v_nbu_tape_media.last_written |
lastWrittenHost | This attribute specifies name of the host which has last written to this media. | |
libraryId | This attribute represents id of the library where the media resides in. | apt_v_nbu_tape_media.library_id |
librarySlotNumber | This attribute specifies the physical slot number that a given piece of media resides in. | apt_v_nbu_tape_media.library_slot_nbr |
libraryType | This attribute specifies the type of tape library (TLD, ACS, 8MM, 4MM, TLM, TLH, and so on). | apt_v_nbu_tape_library.library_type |
IOffset | This attribute specifies the logical block address of the beginning of the block that a backup image exists. | |
mediaOwner | This attribute specifies which media server or server group should own the media that backup images for this policy are written to. | |
mediaServerId | This attribute specifies the Unique identifier for MediaServer. | apt_v_nbu_tape_media.tape_media_id |
mediaServerName | This attribute specifies the name of the device host or Virtual Cluster. | apt_v_nbu_tape_media.media_name |
onHold | A yes/no property indicating that the media has an image copy that is on hold. Zero(0)(false) indicates no hold and 1(true) indicates a hold on this media is present. | apt_v_nbu_tape_media.is_tape_on_hold |
partnerId | This attribute specifies the ID of the opposite side of a optical platter. If on Side A of a platter this would show Side B. | |
physicalExpirationTime | This attribute refers to the actual expiration time of a media. | |
pSize | This attribute specifies the optical partition size in bytes of a media. | apt_v_nbu_tape_media.optical_partition_size |
restoreCount | This attribute specifies the number of times a given piece of backup media has been used for restores. | apt_v_nbu_tape_media.nbr_of_restores |
retentionLevel | This attribute specifies the retention level which determines how long to retain backups and archives. The retention_level is an integer between 0 and 24 (default level is 1). | apt_v_nbu_tape_media.retention_level |
role | This attribute specifies the role of the media, it can be Unassigned, Regular Backups, Catalog Backups, and soon. | apt_v_nbu_tape_media.media_role |
serverGroup | This attribute specifies the server group that owns the volume. If not owned by a server group, the column is empty. | |
sSize | This attribute specifies the Optical media sector size of a backup image. | apt_v_nbu_tape_media.optical_sector_size |
status | This attribute specifies the status of a given piece of media. Active means it is being used at a given point in time, Frozen means errors have occurred on the tape media and it is no longer being used for backups, and soon. | apt_v_nbu_tape_media.vendor_media_status |
totalCapacity | This attribute specifies the total capacity of the tape in KB. Value here per sample is either, the total capacity ifthe media is active, or 0 otherwise. | apt_v_nbu_tape_media.estimated_mbyte_capacity |
type | This attribute specifies the media type of the volume. | apt_v_nbu_tape_media.vendor_media_type |
usedCapacity | This attribute specifies the amount in KB used up in the tape. | apt_v_nbu_tape_media.written_kilobytes |
validImageCount | This attribute specifies the count of images on a media that have not yet expired. | apt_v_nbu_tape_media.nbr_of_valid_images |
volumeGroupName | This attribute specifies the name of the volume group for this volume. | apt_v_nbu_volume_group.volume_group_name |
volumePoolId | This attribute specifies the volume pool ID which automatically starts at 1 for the default pool "NetBackup". Things like Scratch Pools or onsite/offsite pools are typically also used and these all have unique volume pool IDs. | apt_v_nbu_tape_media.vo ume_pool_id |
volumePoolName | This user defined field is the name of the volume pool that media is placed into. | apt_v_nbu_volume_pool.volume_pool_name |