Adding an Alert Notification Delivery Method

Select the delivery method for the alert. Choose from:

Email: Enter a valid email address. This can be a comma-separated list of email addresses. One email is sent for entire report.
SNMP Trap: When you check this box choose V2 or V3. Entry fields change based on your selection.
- For V2, enter the Server Name, Port, and Community. One alert will be sent for each row.
- For V3, enter the Server Name, Port, Security Name and select a Security Level

SNMP Trap V2 Field Descriptions	SNMP Trap V3 Field Descriptions
Server: Enter the IP address of the server which will be used to receive trap.	Server: Enter the IP address of the server which will be used to receive trap.
Port: Port on which SNMP server is running.	Port: Port on which SNMP server is running.
Community: A type of shared password between the portal and the SNMP server, which is used to authenticate the portal.	SNMP Engine ID - The Engine ID is used by SNMPv3 entities to uniquely identify them.
	Security Name: A unique name and similar to username for authentication. This Security Name is used during the creation of users in the SNMP server: For example: if the Security Name is "demo_user", use following command to create a user: createUser -e 0x8000137001a9fe97108f0f4f2f demo_user MD5 demo_password DES demo_password where: 0x8000137001a9fe97108f0f4f2f = engineId demo_user = security name
	Security Level: None Authentication: Provide authentication protocol and authentication passphrase Authentication & Privacy: Provide authentication protocol, authentication passphrase and privacy protocol and privacy Passphrase.

Execute Script: The user-created script must reside in: /opt/aptare/portal/user_script. Check the box and enter a shell script name (Linux). If a path name is included, it will be appended to the above path. For example, when the alert is triggered.
Syslog: Select this and then attach a Syslog configuration from the list that must perform the alert notification. The list is populated provided a configuration is added under Syslog Configuration for the domain.
Syslog configuration
Webhook: Select the webhook configuration that you want to use for the alert notification. This list is populated with the webhooks configured under Admin > Advanced > Webhook.