Configuring Call Home settings
If Call Home is configured, the appliance uploads hardware and software information to the Veritas AutoSupport server and sends email alerts to administrators when hardware errors are detected. Veritas Support uses this information to troubleshoot and resolve the issues. The appliance uses the HTTPS protocol and uses port 443 to connect to the AutoSupport server. You can configure the email addresses that you want to use for failure notifications. See Setting up email alerts.
To configure Call Home settings:
- Use any one of the following options to log in using the user account that you created:
Use a user account with both Appliance Administrator and NetBackup Administrator role, or a user account with only an Appliance administrator role to log in to the NetBackup Flex Scale web interface
https://ManagementServerIPorFQDN/webuiwhere ManagementServerIPorFQDN is the public IP address or the FQDN that you specified for the NetBackup Flex Scale management server during the cluster configuration. In the left pane click Cluster Monitor > Infrastructure, in the upper-right corner click Cluster dashboard, and when prompted click Open cluster dashboard.Use a user account with an Appliance Administrator role to log in to the NetBackup Flex Scale infrastructure management console
https://ManagementServerIPorFQDN:14161where ManagementServerIPorFQDN is the public IP address or the FQDN that you specified for the NetBackup Flex Scale management server during the cluster configuration.
- In the left navigation click Settings, and then click AutoSupport.
- Click Call Home and proxy settings and specify the following details:
Parameter
Description
Enable Call Home transmission
Turn on to upload the appliance health information to the Veritas AutoSupport server.
Enable the proxy server
If the appliance connects to the AutoSupport server through a proxy server, turn on to configure a proxy server.
Enable proxy tunneling
If the proxy server supports SSL tunneling, turn on to enable SSL tunneling.
Proxy server
Name of the proxy server. (Required if you enable the proxy server)
Proxy port
Proxy server port. (Required if you enable the proxy server)
Proxy username
User name to log in to the proxy server.
Proxy password
Password to authenticate the user name that is used to log in to the proxy server.
- Click Save.
A notification is displayed. To view the status and progress of each of the tasks, click View details.
- Optionally, click Test configuration to verify that the configured settings are valid and the appliance can communicate with the AutoSupport server.