Managed NetBackup primary server considerations
Starting from 8.0 version, it is not recommended to reside the OpsCenter server and the NetBackup primary server on the same host. For more information, refer to the following article:
https://www.veritas.com/support/en_US/article.100033419
The following recommendations and requirements should be considered for your managed primary servers:
OpsCenter does not collect data from the managed servers that are configured within a network address translation (NAT) network.
The OpsCenter server should be configured as a fixed host with a static IP address.
It is recommended that any NetBackup primary server is monitored by only one OpsCenter server.
The OpsCenter Server must be of the same or later version than the NetBackup primary server version that it monitors. For example, OpsCenter 8.0 can monitor NetBackup 8.0 and earlier primary servers.
If a NetBackup primary server that was added in OpsCenter is upgraded to a newer version, you should disable and then enable the primary server in the OpsCenter user interface.
If you plan to upgrade the backup product like NetBackup and the OpsCenter components, it is recommended that you upgrade OpsCenter components first. By upgrading OpsCenter components before the backup product, OpsCenter can start collecting data from the backup product once it is added to the console.
You must perform upgrades in the following order:
Serial No.
Steps to upgrade
Reference
1.
Upgrade the OpsCenter Server
2.
Upgrade the OpsCenter View Builder
3.
Upgrade the backup product that you are using like NetBackup.
Refer to the appropriate product manuals.
The order also holds true if you plan to upgrade only OpsCenter and not the backup product. Always upgrade the OpsCenter Server first followed by the View Builder.
OpsCenter can be used to monitor a NetBackup cluster.
See NetBackup High Availability Administrator's Guide for more details on setting up a NetBackup cluster environment.
More information about adding managed NetBackup primary servers in OpsCenter is available.
See Adding a primary server or an appliance primary server in the OpsCenter console.