Examples of using vxlogcfg to configure unified logs — NetBackup 9.0 | Cohesity Documentation

Ransomware attackers specifically target and attempt to destroy backup systems to increase the probability of payment. Hardening your system is critical. Please ensure you have reviewed your platform security using the Security Hardening Checklist

Examples of using vxlogcfg to configure unified logs — NetBackup 9.0 | Cohesity Documentation

Veritas NetBackup™ Logging Reference Guide

Examples of using vxlogcfg to configure unified logs

Note the following:

The vxlogcfg command is the only way to turn off diagnostic and debug messages in unified logging.
Absolute paths must be specified. Do not use relative paths.

Table: Example uses of the vxlogcfg command

Item	Example
Set the maximum log file size	By default, the maximum log file size in unified logging is 51200 KB. When a log file reaches 51200 KB, the file closes and a new log file opens. You can change the maximum file size with the MaxLogFileSizeKB option. The following command changes the default maximum log size to 100000 KB for the NetBackup product: # vxlogcfg -a -p 51216 -o Default -s MaxLogFileSizeKB=100000 For MaxLogFileSizeKB to be effective, the RolloverMode option must be set to FileSize: # vxlogcfg -a --prodid 51216 --orgid Default -s RolloverMode=FileSize MaxLogFileSizeKB can be set per originator. An originator that is not configured uses the default value. The following example overrides the default value for service nbrb (originator ID 118). # vxlogcfg -a -p 51216 -o nbrb -s MaxLogFileSizeKB=1024000
Set log recycling	The following example sets automatic log file deletion for nbemm logs (originator ID 111): # vxlogcfg -a --prodid 51216 --orgid 111 -s RolloverMode=FileSize MaxLogFileSizeKB=512000 NumberOfLogFiles=999 LogRecycle=TRUE This example sets the nbemm logging rollover mode to file size, and turns on log recycling. When the number of log files exceeds 999, the oldest log file is deleted. EXAMPLE 5 shows how to control the number of log files.
Set debug level and diagnostic level	The following example sets the default debug level and diagnostic level of product ID NetBackup (51216): # vxlogcfg -a --prodid 51216 --orgid Default -s DebugLevel=1 DiagnosticLevel=6
List the unified logging settings	The following vxlogcfg example shows how to list the active unified logging settings for a given originator (the nbrb service). Note that MaxLogFileSizeKB, NumberOfLogFiles, and RolloverMode are included in the output. # vxlogcfg -l -o nbrb -p NB Configuration settings for originator 118, of product 51,216... LogDirectory = /usr/openv/logs/nbrb/ DebugLevel = 1 DiagnosticLevel = 6 DynaReloadInSec = 0 LogToStdout = False LogToStderr = False LogToOslog = False RolloverMode = FileSize \| LocalTime LogRecycle = False MaxLogFileSizeKB = 51200 RolloverPeriodInSeconds = 43200 RolloverAtLocalTime = 0:00 NumberOfLogFiles = 3 OIDNames = nbrb AppMsgLogging = ON L10nLib = /usr/openv/lib/libvxexticu L10nResource = nbrb L10nResourceDir = /usr/openv/resources SyslogIdent = VRTS-NB SyslogOpt = 0 SyslogFacility = LOG_LOCAL5 LogFilePermissions = 664

Feedback

Was this page helpful?

Feedback

Was this page helpful?