Ransomware attackers specifically target and attempt to destroy backup systems to increase the probability of payment. Hardening your system is critical. Please ensure you have reviewed your platform security using the Security Hardening Checklist
Cohesity

COHESITY Documentation

Explore our documentation to get started, discover products & new features, access troubleshooting guides, register sources, platforms support.

Products
Data Security Alliance
Visit Cohesity.com
Demos
Support
Blogs
Developers
Partner Portals
Cohesity Community
© 2026 Cohesity, Inc. All Rights Reserved.
Terms of Use|
Privacy Policy|
Legal|
  1. Home
  2. Veritas NetBackup™ Administrator's Guide, Volume I
  3. Section III. Configuring storage
  4. Configuring robots and tape drives
  5. Adding a robot to NetBackup manually
  6. Robot configuration options
  7. Robot control (robot configuration options)
Veritas NetBackup™ Administrator's Guide, Volume I

Robot control (robot configuration options)

The Robot control section of the dialog box specifies the type of control for the robot. The options that you configure depend on the robot type and the media server type.

Table: Robot configuration properties

Property

Description

Robot control is attached to an NDMP host

Specifies that an NDMP host controls the robot.

You must configure other options (depending on the robot type and device host type).

Robot is controlled locally by this device host

Specifies that the host to which the robot is attached controls the robot.

You must configure other options (depending on the robot type and device host type).

Robot control is handled by a remote host

Specifies that a host other than the device host controls the robot.

You must configure other options (based on the selected robot type and device host platform).

ACSLS host

Specifies the name of the Sun StorageTek ACSLS host; the ACS library software resides ACSLS host. On some UNIX server platforms, this host can also be a media server.

The ACS library software component can be any of the following:

  • Automated Cartridge System Library Software (ACSLS)

    Examples are available in the NetBackup Device Configuration Guide.

  • STK Library Station

  • Storagenet 6000 Storage Domain Manager (SN6000).

    This STK hardware serves as a proxy to another ACS library software component (such as ACSLS).

Note:

If the device host that has drives under ACS robotic control is a Windows server, STK LibAttach software must also be installed. Obtain the appropriate LibAttach software from STK.

For compatibility information, see the NetBackup Enterprise Server and Server - Hardware and Cloud Storage Compatibility List:

http://www.netbackup.com/compatibility

An overview of ACS robots is available in the NetBackup Device Configuration Guide.

NDMP host name

Specifies the name of the NDMP host to which the robot is attached.

Robot control host

Specifies the host that controls the robot.

Robot device

The following applies to a Windows device host only. Specifies the name of the robot device.

Click Browse and then select a robot from the list that appears in the Devices dialog box.

If the discovery operation fails to discover a robot, click More in the Devices dialog box. Enter either the Port, Bus, Target, and LUN numbers or the device name in the next dialog box. If the browse operation fails for any other reason, a dialog box appears that lets you enter the information.

Use the Windows management tools to find the Port, Bus, Target, and LUN numbers.

If the browse operation does not find attached robots, an error dialog box appears.

Robotic device file

UNIX device host only. Specifies the device file that is used for SCSI connections. The device files are located in the /dev directory tree on the device host.

To specify the robotic device file, click Browse and then select a robotic device file from the list that appears in the Devices dialog box.

If the browse operation fails to show all of the attached robots, click More. Enter the path of the device file in the robotic device file field.

If the browse operation fails to show all of the attached robots, click Other Device. Enter the path of the device file in the next dialog box.

If the browse operation does not find attached robots, an error dialog box appears.

Information about how to add device files is available in the NetBackup Device Configuration Guide.

Robot device path

NDMP host only. Specifies the name of the robotic device that is attached to the NDMP host.

Port, Bus, Target, LUN

Windows hosts only. The Port, Bus, Target, and LUN are the SCSI coordinates for the robotic device. To specify the SCSI coordinates of the device, enter the Port, Bus, Target, and LUN.

Feedback

Was this page helpful?
Previous

Robot number (robot configuration option)

Next

Managing robots

Feedback

Was this page helpful?