About the configuration items in cloud.json, contentrouter.cfg and spa.cfg
The cloud.json file is available at: <STORAGE>/etc/puredisk/cloud.json.
The file has the following parameters:
Parameter | Details | Default value |
|---|---|---|
UseMemForUpload | If it is set to true, the upload cache directory is mounted in memory as tmpfs. It is especially useful for high speed cloud that disk speed is bottleneck. It can also reduce the disk competition with local LSU. The value is set to true if the system memory is enough. The default value is true if there is enough memory available. | true |
CachePath | The path of the cache. It is created under an MSDP volume according to the space usage of MSDP volumes. It will reserve some space that local LSU cannot write beyond. Usually you do not need to change this path, unless in some case that some volumes are much freer than others, multiple cloud LSUs may be distributed to the same disk volume. For performance consideration, you may need to change this option to make them distributed to different volumes. This path can be changed to reside in a non-MSDP volume. | NA |
UploadCacheGB | It is the maximum space usage of upload cache. Upload cache is a subdirectory named "upload" under CachePath. For performance consideration, it should be set to larger than: (max concurrent write stream number) * MaxFileSizeMB * 2. So, for 100 concurrent streams, about 13 GB is enough. Note: The initial value of UploadCacheGB in the When you add a new cloud LSU, the value of UploadCacheGB is equal to CloudUploadCacheSize. You can later change this value in the | 12 |
DownloadDataCacheGB | It is the maximum space usage of data file, mainly the Note: The initial value of DataCacheGB in the When you add a new cloud LSU, the value of DataCacheGB is equal to CloudDataCacheSize. You can later change this value in the | 500 |
DownloadMetaCacheGB | It is the maximum space usage of metadata file, mainly the Note: The initial value of MetaCacheGB in the When you add a new cloud LSU, the value of MetaCacheGB is equal to CloudMetaCacheSize. You can later change this value in the | 500 |
MapCacheGB | It is the max space usage of Note: The initial value of MapCacheGB in the When you add a new cloud LSU, the value of MapCacheGB is equal to CloudMapCacheSize. You can later change this value in the | 5 |
UploadConnNum | Maximum number of concurrent connections to the cloud provider for uploading. Increasing this value is helpful especially for high latency network. | 60 |
DataDownloadConnNum | Maximum number of concurrent connections to the cloud provider for downloading data. Increasing this value is helpful especially for high latency network. | 40 |
MetaDownloadConnNum | Maximum number of concurrent connections to the cloud provider for downloading metadata. Increasing this value is helpful especially for high latency network. | 40 |
MapConnNum | Maximum number of concurrent connections to the cloud provider for downloading map. | 40 |
DeleteConnNum | Maximum number of concurrent connections to the cloud provider for deleting. Increasing this value is helpful especially for high latency network. | 100 |
KeepData | Keep uploaded data to data cache. The value always false if UseMem is true. | false |
KeepMeta | Keep uploaded meta to meta cache, always false if UseMem is true. | false |
ReadOnly | LSU is read only, cannot write and delete on this LSU. | false |
MaxFileSizeMB | Max size of bin file in MB. | 64 |
WriteThreadNum | The number of threads for writing data to the data container in parallel that can improve the performance of IO. | 2 |
RebaseThresholdMB | Rebasing threshold (MB), when image data in container less than the threshold, all of the image data in this container will not be used for deduplication to achieve good locality. Allowed values: 0 to half of MaxFileSizeMB, 0 = disabled Adding a new cloud LSU fails if no partition has free space more than the following: CloudDataCacheSize + CloudMapCacheSize + CloudMetaCacheSize + CloudUploadCacheSize + WarningSpaceThreshold * partition size Use thecrcontrol --dsstat 2 command to check the space of each of the partition. | 4 |
UsableMemoryLimit | Specify the maximum usable memory size in percentage. MaxCacheSize + MaxCloudCacheSize + Cloud in-memory upload cache size must be less than or equal to the value of UsableMemoryLimit | 80% |
Note:
Each Cloud LSU has a cache directory. The directory is created under an MSDP volume that is selected according to the disk space usage of all the MSDP volumes. Cloud LSU reserves some disk space for cache from that volume, and the local LSU cannot utilize more disk space.
The initial reserved disk space for each of the cloud LSU is the sum of values of UploadCacheGB, DownloadDataCacheGB, DownloadMetaCacheGB, and MapCacheGB in the <STORAGE>/etc/puredisk/cloud.json file. The disk space decreases when the caches are used.
There is a Cache options in crcontrol --dsstat 2 output:
# crcontrol --dsstat 2
=============== Mount point 2 ===============
Path = /msdp/data/dp1/1pdvol
Data storage
Raw Size Used Avail Cache Use%
48.8T 46.8T 861.4G 46.0T 143.5G 2%
Number of containers : 3609
Average container size : 252685915 bytes (240.98MB)
Space allocated for containers : 911943468161 bytes (849.31GB)
Reserved space : 2156777086976 bytes (1.96TB)
Reserved space percentage : 4.0%
The Cache option is the currently reserved disk space by cloud for this volume. The disk space is the sum of the reserved space for all cloud LSUs that have cache directories on this volume. The actually available space for Local LSU on this volume is Avail - Cache.
The contentrouter.cfg file is available at: <STORAGE>/etc/puredisk/contentrouter.cfg.
The file has the following parameters:
Parameter | Details | Default value |
|---|---|---|
CloudDataCacheSize | Default data cache size when adding Cloud LSU. Decrease this value if enough free space is not available. | 500 GiB |
CloudMapCacheSize | Default map cache size when adding Cloud LSU. Decrease this value if enough free space is not available. | 5 GiB |
CloudMetaCacheSize | Default meta cache size when adding Cloud LSU. Decrease this value if enough free space is not available. | 500 GiB |
CloudUploadCacheSize | Default upload cache size when adding Cloud LSU. The minimum value is 12 GiB. | 12 GiB |
MaxCloudCacheSize | Specify the maximum cloud cache size in percentage. It is based on total system memory, swap space excluded. | 20 % |
CloudBits | The number of top-level entries in the cloud cache. This number is (2^CloudBits). Increasing this value improves cache performance, at the expense of extra memory usage. Minimum value = 16, maximum value = 48. | Auto-sized according to MaxCloudCacheSize |
DCSCANDownloadTmpPath | While using the dcscan to check cloud LSU, data gets downloaded to this folder. For details, see the dcscan tool in cloud support section. | disabled |
The spa.cfg file is available at: <STORAGE>/etc/puredisk/spa.cfg.
The file has the following parameters:
Parameter | Details | Default value |
|---|---|---|
CloudLSUCheckInterval | The check cloud LSU status interval in seconds. | 1800 |