To add a tape drive

1. In the NetBackup Administration Console, expand Media and Device Management > Devices > Drives.
2. Select Add a New Drive. In the dialog box, click Add.
3. In the Add a New Drive dialog box, enter the name of the drive in the Drive Name box.
4. Click Add to specify a drive path.
5. In the Add Path dialog box, select the host and the path information as follows:

   Device host	Select the name of the NetBackup media server. Use the pull-down to select media servers already defined, or click Add to enter a new one.
   Path	Enter the device file name of the tape drive, such as nrst2a. Refer to the NAS vendor documentation for your drive for the correct format of the device file name. An alternate method is to use the following command to find the device file name for the drive, if the NDMP host is running NDMP protocol V3 or later: tpautoconf -probe ndmp_host_name

6. Click This path is for a Network Attached Storage device.
7. In the NDMP Host drop-down list, select the name of the NAS filer to which the drive is attached.
8. Click OK.
9. Return to the Add a New Drive dialog box and enter the drive information as required. Repeat this procedure for each drive that must be added.

   When you are prompted to restart the Media Manager device daemon and all robotic daemons, click Yes.