Verifying connectivity from clients to array using SSSU 5.0
NetBackup communicates with the array by means of the SSSU for HP StorageWorks Command View EVA utility or the StorageWorks Command View EVA Web interface. To verify that the CLI is installed and that NetBackup can communicate with the array, use the following procedure on each NetBackup client.
To verify connectivity from clients to array using SSSU 5.0
- Connect to the disk array host:
/opt/hp/sssu/sssu_sunos
Example output:
SSSU for HP StorageWorks Command View EVA 5.0 [v5.0.12]
- Log on to the disk array host:
NoSystemSelected> select manager manager_host user=manager_username password=manager_password - Verify that you can see the EVA arrays that are managed by the host:
NoSystemSelected> ls cell
Example output:
Systems available on this Manager: HPEVA4000 VRTS.EVA.ROS
See Troubleshooting the SSSU procedure.
To verify connectivity from clients to array using SSSU 6.0
- Connect to the disk array host:
/opt/hp/sssu/sssu_sunos
Example output:
SSSU for HP StorageWorks Command View EVA Version: 6.0 Build: 34 - At the prompts, log on to the disk array host:
Manager:disk array host name Username:username Password:password - Verify that you can see the EVA arrays that are managed by the host:
NoSystemSelected> ls cell
Example output:
Systems available on this Manager: hpeva_2200nc07
More Information