The NetBackup administrator must do the following tasks:

• If necessary, configure target devices on the array.

  See the topic for your array.

  See Initial configuration of certain arrays.

• For certain arrays, configure NetBackup disk array host credentials, which are required to access the array snapshot management software.

  See the topic for your array.

  EMC CLARiiON	See Configuring NetBackup to access the CLARiiON array.
  EMC Symmetrix	See About configuring NetBackup to access the Symmetrix array.
  HP EVA	See Configuring NetBackup to access the EVA array.
  IBM DS6000 and DS8000	See Configuring NetBackup to access the IBM DS6000 or DS8000 array.
  IBM DS4000	See Configuring NetBackup to access the IBM DS4000 array.
  Hitachi SMS/WMS/AMS, USP/NSC, USP-V/VM	See About communication between NetBackup and the Hitachi array.
  HP-XP	See Determining if the HP-XP command devices are visible.

• Create a NetBackup Snapshot Client policy for the array.

  See the topic on the NetBackup policy for your array.

  EMC CLARiiON	See Configuring a NetBackup policy for a CLARiiON array method.
  EMC Symmetrix	See Configuring a policy for EMC_TimeFinder methods.
  HP EVA	See Configuring a NetBackup policy for an HP EVA array method.
  IBM DS6000 and DS8000	See Configuring a NetBackup policy for IBM_DiskStorage_FlashCopy.
  IBM DS4000	See Configuring a NetBackup policy for IBM_StorageManager_FlashCopy.
  Hitachi SMS/WMS/AMS, USP/NSC, USP-V/VM	See Configuring a NetBackup policy for Hitachi_ShadowImage or Hitachi_CopyOnWrite.
  HP-XP	See Configuring a NetBackup policy for HP_XP_BusinessCopy and HP_XP_Snapshot.