Before you begin configuring NetBackup on Windows
Observe the following points when performing the configurations described in this chapter:
Verify that NetBackup supports your server platform and devices. Download the NetBackup hardware and operating system compatibility lists:
For NetBackup to recognize and communicate with connected devices and for device discovery to discover devices, NetBackup issues SCSI pass-through commands to the devices in a configuration.
A tape driver must exist for each tape device. Attached devices appear in the registry.
Use the Microsoft Windows device applications to verify that the devices are configured correctly. The device applications available on your server may differ depending on your Windows operating system. Make sure that Windows detects the devices on the SAN before you configure the NetBackup Shared Storage Option.
If you have multiple devices connected to a fibre bridge, Windows may only see one LUN. This will normally be the device with the lowest-ordered LUN.
This limitation occurs because of the default install settings for the device driver for some fibre channel HBAs. See your vendor documentation to verify the settings.
Information about how to configure API robot control over a LAN is available
See the "Oracle StorageTek ACSLS robots" topic in this guide.
After configuring the hardware, add the drives and robots to NetBackup.