To restore a VM to a different location

1. Find the path to a resource pool at the restore destination. (If you already know the full path, you can skip this step.)

   Note: To restore to a different location, it is usually necessary to designate a different resource pool. Here is an example of a resource pool path:

   /TechOffice/host/F2/pl9.acme.com/Resources

   To find the path, enter the following on the master server, media server, or restore host:

   UNIX, Linux:

   /usr/openv/netbackup/bin/bpVMreq <restore_host> 11 0 <ESXi_server> <VMserver_or_vCenter_server>

   Windows:

   <install_path>\NetBackup\bin\bpVMreq.exe <restore_host> 11 0 <ESXi_server> <VMserver_or_vCenter_server>

   Note:

   The numeric value 11 0 is required and must be entered as shown.

   For example:

   bpVMreq battleship.acme.com 11 0 ESXi_pl9.acme.com vC_p9vm3.acme.com

   Where battleship.acme.com is the restore host, ESXi_pl9.acme.com is the destination ESXi server, and vC_p9vm3.acme.com is the destination vCenter server.

   This command generates a path to an XML file in a temporary location. The XML file lists all the available resource pools.

   Here is an example of an XML file that bpVMreq creates:

   <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
   <ResourcePoolList><ResourcePool Name="Resources" 
   Path="/TechOffice/host/F2/pl9.acme.com/Resources" 
   Type="ResourcePool"><ResourcePoolList/>
   </ResourcePool></ResourcePoolList>

   In this example, the path to the resource pool is /TechOffice/host/F2/pl9.acme.com/Resources. Make a note of the path for use in the next step.

2. Create a text file with the following change entries.

   Note: Each change entry helps to define the location for the restore. Each change line must end with a carriage return.

   change vmname to <new_virtual_machine_name>	(The change vmname entry is optional)
   change esxhost to <new_ESXi_host>
   change resourcepool to <path_to_new_resouce_pool>
   change networkname to <new_network>	(The change networkname entry is optional)

   Enter each change line exactly as it appears in this list, except for the variable at the end (such as new_virtual_machine_name). Replace the variable with the new name. For example:

   change esxhost to ESXi01.prod4.com

   For the new_resouce_pool, use the path that was obtained in the first step of this procedure. For example:

   change resourcepool to /TechOffice/host/F2/pl9.acme.com/Resources

   This text file is called the -R rename file, and is used with the nbrestorevm command in the next step.

3. To restore the VM using the -R rename file, enter the nbrestorevm command with the -R option as follows.

   Note: The -R option specifies the path to the text file (rename file).

   • To restore to the same vCenter server but to a different ESXi host, enter the following:

     nbrestorevm - vmw - ir_activate - C <virtual_machine> -temp_location <temporary_datastore> -R <rename_file_path>

   • To restore to a different vCenter server and a different ESXi host, enter the following:

     nbrestorevm - vmw - ir_activate - C <virtual_machine> -temp_location <temporary_datastore> -R <rename_file_path> -vmserver <vCenter_server>

   To restore a VM after Auto Image Replication (AIR) to a disaster recovery (DR) site: you must also include the -vmproxy option on the nbrestorevm command to specify the restore host at the DR site.