Robot inventory options
The following table shows the robot inventory options when you use the NetBackup Administration Console:
Table: Robot inventory options
Option | Description |
|---|---|
Advanced options | is active if or is selected. This button opens the Advanced Robot Inventory Options dialog box, from which you can configure more options. |
Device host | The option is the host that controls the robot. |
Empty media access port prior to update | The operation is active only for the robots that support that function. To inject volumes in the robot's media access port into the robot before you begin the update, select . The volumes to be injected must be in the media access port before the operation begins. If you select and the media access port is empty, you are not prompted to place volumes in the media access port. Note: If you use NetBackup to eject volumes from the robot, remove the volumes from the media access port before you begin an inject operation. Otherwise, if the inject port and eject port are the same, the ejected volumes may be injected back into the robotic library. |
Robot | Use the option to select a robot to inventory. If you selected a robot in the , that robot appears in this field. |
Show contents | Displays the media in the selected robotic library; does not check or change the EMM database. |
Compare contents with volume configuration | Compares the contents of a robotic library with the contents of the EMM database but does not change the database. See About comparing a robot's contents with the volume configuration. |
Preview volume configuration changes | Compares the contents of a robotic library with the contents of the EMM database. If differences exist, NetBackup recommends changes to the NetBackup volume configuration. |
Update volume configuration | Updates the database to match the contents of the robot. If the robot contents are the same as the EMM database, no changes occur. |