Preinstallation checklist for a NetBackup failover server installation on HP Service Guard cluster
The NetBackup Enterprise Server requests certain cluster-related information during installation. Fill out the checklist for all configurations and the checklist for your specific configuration before you begin installation.
The following information is required for all HP Service Guard cluster configurations.
Table: All HP Service Guard cluster configurations
Resource | Example |
|---|---|
Virtual name for NetBackup: | vname |
IP address: | 10.209.14.54 |
Subnet for the virtual name: | 10.209.14.0 |
The following information is required if you use HP Service Guard for different configurations.
Table: HP Service Guard with VxVM volume group
Resource | Example |
|---|---|
Disk Group Name: | nbudg |
Logical Volume Path: | dev/dsk/nbudg/nbuvol |
Mount Point: | /opt/VRTSnbu |
File System: | vxfs |
Mount Options: | |
Unmount Options: | |
fsk Options: |
Table: HP Service Guard with Veritas cluster volume manager
Resource | Example |
|---|---|
Disk Group Name: | nbudg |
Logical Volume Path: | /dev/dsk/nbudg/nbuvol |
Mount Point: | /opt/VTRSnbu |
File System: | vxfs |
Mount Options: | |
Unmount Options: | |
fsk Options: |
Table: HP Service Guard with LVM volume group
Resource | Example |
|---|---|
Disk Group Name: | nbuvg |
Logical Volume Path: | dev/nbuvg/lvo1 |
Mount Point: | opt/VRTSnbu |
File System: | vxfs |
Mount Options: | |
Unmount Options: | |
fsk Options: |