Installing NetBackup Windows clients locally or remotely
Use this procedure to install NetBackup on your local computer or on multiple computers on your network. You can stop the installation process at any time by clicking or by clicking to return to the previous window.
When you install Windows clients remotely, note the following:
Requirements | Review the requirements for Windows client installation. See About Windows client installation methods and requirements. |
Privileges | You must have administrator privileges on the remote clients for the NetBackup installation to complete successfully. |
Client name entries | During installation, the client name is written to the registry in lowercase. For backups to work, the policies on the NetBackup server must specify the client names in lowercase. |
Note:
After client installation, you may need to restart the system for the changes to take effect. A message appears to alert you if a restart is necessary.
To install NetBackup client software locally or remotely on Windows systems
- Log on as administrator on the host where you want to install the client software.
- Navigate to the directory where the images reside and run Browser.exe to start the NetBackup Installation Wizard.
- On the initial screen, select Installation.
- On the Installation screen, select NetBackup Client Software Installation.
- On the Welcome screen, review the content and click Next.
- (Conditional) If you previously installed NetBackup 8.1.2 on this host, you see the Program Maintenance dialog.
Select Modify to change installation settings for the local host, or to use the local host as a platform to perform push installation to remote hosts.
Select Repair to restore NetBackup 8.1.2 to its original state on the local host.
Select Remove to remove NetBackup 8.1.2 from the local host.
- On the License Agreement screen, accept the terms of the agreement and click Next.
- On the Veritas NetBackup Client Installation Type screen, provide the following information:
Where to install
For a local installation, select Install to this computer only.
For remote installation, select Install to multiple computers on your network.
The procedure does not install the client on the local host unless you add it to the list of systems that you want to install.
Typical
Select this option to install NetBackup with the default settings.
Custom
Select this option to install NetBackup with the settings that you want.
Click Next.
- (Conditional) This step applies only to local Custom installations.
On the Veritas NetBackup Client Destination Folder screen, you can select where the NetBackup files are installed.
Destination Folder
By default, NetBackup files are installed to the following location:
C:\Program Files\VERITASTo change the folder destination where NetBackup is installed:
Click Change.
Browse to the preferred location and designate a new or an existing folder.
Click Next.
Additional information about installation folder restrictions is available.
See Restrictions on the NetBackup installation directory.
Note:
For upgrades, you cannot change the destination.
- (Conditional) This step applies only to Custom installations.
On the NetBackup Options screen, select from the following options:
At System Startup
Enable or disable the following options:
Start NetBackup Client Service Automatically
By default, this option is enabled so that NetBackup services are available immediately after system startup.
Start NetBackup Client Job Tracker Automatically
By default, this option is disabled. To start this option manually after installation, click Start > All Programs > Veritas NetBackup > NetBackup Client Job Tracker.
Ports
On this screen, you can change port numbers, if it is necessary in your configuration.
You may need to change a port number if you encounter conflicts when NetBackup and another industry product try to share the same port. Another example is if a port conflict occurs with a firewall, which may cause security issues.
To change a port number, select the port number that you want to replace and type the new number.
Click Next.
- On the NetBackup Services screen, provide the following startup account and startup type information for NetBackup client services:
Log On
Specify either Local System account or This account.
By default, the Local System account is selected, so that NetBackup uses the built-in system account. When this option is selected, the fields below it are disabled.
To specify a different system account:
Select this option.
Enter the account information in the following fields:
Domain
Username
Password
Safe Abort Option
This option determines how the installation proceeds if a restart is required as part of the installation or upgrade.
If you select this option and the installation process determines that a restart is required, the installation (or upgrade) stops. The system is then rolled back to its original state.
If you do not select this option, the installation (or upgrade) proceeds even if the installation process determines that a restart is required.
- On the NetBackup System Names screen, the following fields are populated automatically. Changes are not normally required. Except for the Client Name, you can make changes as needed for your configuration.
Client Name
Do not change this name.
Master Server Name
If necessary, change this name to the appropriate master server where the client backup images are to be stored.
Additional Servers
Enter all of the master server and media server names that you want this client to access.
- After you confirm you want to continue, the installer fetches the certificate authority certificate details. You have the option to click Cancel to halt this action. Be aware if you click Cancel, this action requires you to rerun the installation or continue with the installation without the required security components. If these security components are absent, backups and restores fail.
- On the Confirm the CA fingerprint screen, select I recognize the fingerprint for this host. Proceed with the certificate deployment. if the fingerprint displayed is one you recognize and trust. Click Next to continue.
If you do not recognize or trust the displayed fingerprint, select Proceed without the certificate deployment.
After you confirm the fingerprint information, the installer stores the certificate authority certificate details. You have the option to click Cancel to halt this action. Be aware if you click Cancel, this action requires you to rerun the installation or continue with the installation without the required security components. If these security components are absent, backups and restores fail.
- After the Certificate Authority certificate is stored, the installer deploys the host certificate. You have the option to click Cancel to halt this action. Be aware if you click Cancel, this action requires you to rerun the installation or continue with the installation without the required security components. If these security components are absent, backups and restores fail.
- (Conditional) If prompted by the Authorization Token screen, enter the security token.
Please enter an authorization token
The token format is 16 upper case letters. Alternatively, you can also select the Proceed without providing a security token option. When the option is selected, this warning is shown:
In some environments, failure to provide a security token can result in failed backups. Contact your backup administrator if you have questions.
After you enter a security token, you have the option to click Cancel to halt the deployment of the host certificate. Be aware if you click Cancel, this action requires you to rerun the installation or continue with the installation without the required security components. If these security components are absent, backups and restores fail.
If this installation is a remote installation, the specification of an authorization token is optional. Contact your backup administrator to determine if authorization tokens are required for your environment.
On the Veritas NetBackup Remote Hosts screen, specify the hosts where you want NetBackup installed.
Destination Systems
Right-click the Windows Destination Computers icon and select from the drop-down menu , or use the following icons:
Browse
Click here to search the network for the hosts where you want to install NetBackup.
On the Available Systems dialog box, select the computer to add and click Next.
On the Remote Computer Login Credentials dialog box, enter the User Name and the Password of the account to be used to perform the installation on the remote computers.
If you plan to install to multiple remote computers, click the box next to Remember User Name and Password. Selecting this option prevents the need to enter this information for each remote computer.
Click OK.
On the Remote Destination Folder dialog box, verify or change the Destination Folder where NetBackup is installed.
The default location is
C:\Program Files\Veritas.If you plan to install to multiple remote computers and you want to use the same location, click the box next to Use this folder for subsequent systems. Selecting this option prevents the need to enter the location for each remote computer.
Import
Click here to import a text file that contains a list of host names. When you create the text file, the host names must be defined in the following format:
Domain\ComputerNameAdd
Click here to add a host manually.
On the Manual Remote Computer Selection dialog box appears, enter the Domain and the Computer Name, then click OK.
On the Remote Computer Login Credentials dialog box, enter the User Name and the Password of the account to be used to perform the installation on the remote computers.
If you plan to add and install to multiple remote computers, click the box next to Remember User Name and Password. Selecting this option prevents the need to enter this information for each remote computer.
Click OK.
On the Remote Destination Folder dialog box, verify or change the Destination Folder where NetBackup is installed.
The default location is
C:\Program Files\Veritas.If you plan to install to multiple remote computers and you want to use the same location, click the box next to Use this folder for subsequent systems. Selecting this option prevents the need to enter the location for each remote computer.
Click OK.
Remove
To remove a host from the Destination Systems list, select the host and click here.
Change
Click here to change the destination for NetBackup file installation on the selected remote host.
Click Next.
- On the Ready to Install the Program screen, review the Installation Summary that shows your selections from the previous steps.
Note:
Veritas recommends that you review the summary screen for any warning messages. You can prevent installation and upgrade issues if you resolve any problems before you continue the installation.
Then select one of the following options:
Click Install to start the installation.
Click Back to view the previous screens and make any changes, then return to this screen and click Install.
Click Cancel to cancel the installation.
After you click Install, the installation process begins and a screen appears that shows you the installation progress. This process may take several minutes.
Up to five remote installations occur simultaneously. When a remote installation is completed, another one begins so that a maximum of five installations are in progress.
If you click Cancel after you click Install, the installation does not stop immediately. Installation continues on all remote hosts where the installation has already started. Any specified hosts after that point do not get client software installed.
NetBackup considers any remote installations that were completed when you clicked Cancel to be successful.
- On the Installation Complete screen, click Finish.
Examine the installation log on the following location:
%ALLUSERSPROFILE%\Veritas\NetBackup\InstallLogs\An installation log file provides detailed installation information and shows whether any errors occurred.
Note:
When you perform a remote installation to multiple computers, this option only lets you view the log for the local computer. Each computer that you selected for installation contains its own installation log file. To view the log file of a remote computer, open a Windows Explorer window, enter \\COMPUTERNAME, and navigate to the
InstallLogsdirectory.Search the installation log for the following error indications:
Strings that include
Return Value 3.Important log messages are color coded as follows:
Yellow = warning.
Red = error.