Configuring NetBackup to access the CLARiiON array
You must supply logon credentials that allow the NetBackup client to access each storage processor on each EMC CLARiiON array.
IMPORTANT: For single path configurations, you must add credentials for the CLARiiON storage processor that owns the source LUNs and any clone LUNs. For multipath configurations, you must add credentials for both storage processor A and storage processor B. The storage processor that owns the LUN may be changed by the multipath software. (For single path configurations, all CLARiiON LUNs must be owned by only one storage processor.)
To configure NetBackup to access the CLARiiON array
- In the NetBackup Administration Console, click the Media and Device Management > Credentials > Disk Array Hosts node in the NetBackup Administration Console.
- Right-click in the Disk Array Hosts pane and select New Disk Array Host.
- Enter the host name of the EMC CLARiiON array.
- Select EMC CLARiiON in the Disk Array Host Type pull-down menu.
- Enter the user name and password for the storage processor.
- Clear (uncheck) the Connect using port number checkbox.