Solaris command summary
The following is a summary of commands that may be useful when you configure and verify devices:
/usr/sbin/modinfo | grep sg
/usr/openv/volmgr/bin/driver/sg.install
/usr/sbin/rem_drv sg
Uninstalls the sg driver. This command usually is not necessary because sg.install uninstalls the old driver before it upgrades a driver.
/usr/openv/volmgr/bin/sg.build all -mt max_target -ml max_lun
Updates
st.conf,sg.conf, and sg.links, and generates SCSI Target IDs with multiple LUNs./usr/openv/volmgr/bin/sgscan all
Scans all connected devices with an SCSI inquiry and provides correlation between physical and the logical devices that use all device files in
/dev/sg.Also checks for the devices that are connected to the StorEdge Network Foundation HBA that are not configured for use by Cohesity products.
boot -r or reboot -- -r
Reboot the system with the reconfigure option (-r). The kernel's SCSI disk (sd) driver then recognizes the drive as a disk drive during system initialization.
See the procedures in this chapter for examples of their usage.