Verifying the device configuration on Linux
The /proc/scsi/scsi file shows all of the devices that the SCSI driver detects.
If the operating system detects the SCSI devices, NetBackup can discover them.
To verify that the operating system can see the devices
- Run the following command from a terminal window:
cat /proc/scsi/scsi
The output that is displayed should be similar to the following:
Attached devices: Host: scsi8 Channel: 00 Id: 05 Lun: 00 Vendor: IBM Model: ULT3580-HH8 Rev: HB81 Type: Sequential-Access ANSI SCSI revision: 06 Host: scsi8 Channel: 00 Id: 05 Lun: 01 Vendor: IBM Model: 3573-TL Rev: 1110 Type: Medium Changer ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 01 Lun: 00 Vendor: IBM Model: ULT3580-HH7 Rev: H9E3 Type: Sequential-Access ANSI SCSI revision: 06