Eject volumes
You can eject single or multiple volumes.
You cannot eject multiple volumes with one operation if they reside in multiple robots.
Operator intervention is only required if the robotic library does not contain a media access port large enough to eject all of the selected volumes. For these robot types, NetBackup prompts an operator to remove the media from the media access port so the eject operation can continue.
To eject volumes
- Open the NetBackup web UI.
- On the left, select Storage > Tape storage. Then select the Volumes tab.
- Select one or more volumes that you want to eject.
- Click Eject from robot.
- Do one of the following actions:
ACS robots
Select the media access port to use for the ejection, then click Eject.
TLD robots
Click Eject.
The robotic library may not contain a media access port large enough to eject all of the selected volumes. For most robot types, you are prompted to remove the media from the media access port so the eject can continue with the remaining volumes.
More Information