Throttle bandwidth properties
To access this setting, in the web UI select . Select the primary server. If necessary click , then click . Click .
Use the Throttle bandwidth properties to specify a limit for the network bandwidth or transfer rate that NetBackup clients use on a network. The actual limiting occurs on the client side of the backup connection. These properties limit only backups. Restores are unaffected. The default is that the bandwidth is not limited.
The Throttle bandwidth properties are similar to the Bandwidth host properties, but offer greater flexibility in IPv6 environments.
To add, edit, or remove a throttle bandwidth setting
- Open the NetBackup web UI.
- On the left, click Hosts > Host properties.
- Select the primary server. If necessary, click Connect. Then click Edit primary server.
- Click Throttle bandwidth.
Add a setting
To add a network or host setting
Click Add.
Enter the name of the network or host to which the throttle applies.
Select the bandwidth for the network or host indicated. A value of zero disables the throttling of IPv6 addresses.
This value is the transfer rate in kilobytes per second. A value of zero disables the throttling of IPv6 addresses.
Click Add.
Edit a setting
To edit a network or host setting
Locate the name of the network or host.
Click Actions > Edit.
Make the wanted changes.
Click Save.
Delete a setting
Delete a a network or host setting
Locate the name of the network or host.
Click Actions > Delete.
- Click Save