Move a volume group

You can move a volume group from a robotic library to standalone storage or from standalone storage to a robotic library.

Moving a volume group changes only the residence information in NetBackup. You must move the volumes physically to their new locations.

To move a volume group

Open the NetBackup web UI.
On the left, select Storage > Tape storage. Then select the Volume groups tab.
Select the volume group that you want to move.
Select Move.

You can only specify the properties that apply for the move type.

Property	Description
Selected volume group	The volume group to move.
Robot	When you move from a robotic library, this value displays the robot type, robot number, and robot control host. When you move standalone volumes, this value displays "Standalone".
Destination	If you move a volume group to a robotic library, select the Device host and the Robot. If you move a volume group to standalone storage, no configuration is needed.
Device host	The host that controls the robotic library.
Robot	The destination robotic library.

Select Confirm.
After you move the volume group logically, physically move the volumes to their new locations.