Performing local, remote, or clustered server upgrades on Windows systems
Use the following procedure to upgrade to NetBackup 11.1 on a local, a remote, or a clustered computer.
To upgrade the NetBackup binaries for a local, remote, or clustered server on Windows
- Log on to the system where you want to initiate the NetBackup upgrade. Be sure to log on with administrator privileges.
To upgrade local Windows systems, log on to the computer directly at the console.
To upgrade remote Windows systems, log on to a system with network access to all of the hosts where you want to install NetBackup.
To upgrade clustered Windows systems, log on to the active node (the node with the shared disk).
- Navigate to the directory where the ESD images (downloaded files) reside and run Browser.exe to start the NetBackup Installation Wizard.
- On the initial browser screen (Home), click Install/Upgrade.
- On the Install/Upgrade screen, click NetBackup Server Software Install/Upgrade.
- If you are prompted about the absence of required Visual C++ run-time libraries, review the information and respond accordingly. More information is available.
See Windows compiler and security requirements for NetBackup 11.1 and later upgrade.
- On the Welcome screen, review the content and click Next.
- (Conditional) If you previously installed NetBackup 11.1 on this host, you see the Program Maintenance dialog.
Select Modify to change installation settings for the local host, or to use the local host as a platform to perform push installation to remote hosts.
Select Repair to restore NetBackup 11.1 to its original state on the local host.
Select Remove to remove NetBackup 11.1 from the local host.
- On the License Agreement screen, do the following:
I agree to and accept the terms of the license agreement.
You must select this item to upgrade the software.
Click Next.
- On the NetBackup Install/Upgrade Type screen, provide the following information:
Where to install
For a local upgrade, select Upgrade this computer only.
For a remote upgrade, select Install or upgrade one or more computers on your network.
For a clustered upgrade, the only option is Upgrade a clustered primary server.
Typical
Select this option to upgrade NetBackup with the default settings.
Primary server only: By default the typical option looks at the primary server's configuration and only upgrades the NetBackup Administration Console if it's currently present. Choose Custom if you want to force a state other than what is currently on the primary server. If you select to exclude the NetBackup Administration Console, any previous versions are removed.
Media server only: By default the typical option looks at the media server's configuration and only upgrades the Java GUI and the JRE packages if they are currently present. Choose Custom if you want to force a state other than what is currently on the media server. If you select to exclude the Java GUI and the JRE, any previous versions are removed.
Custom
Select this option to override the default NetBackup settings.
Click Next.
- On the NetBackup Server Role and Licenses screen, provide the following information:
License
Upgrades from versions earlier than NetBackup 8.1.2 only support the production licenses that are downloaded from the Veritas Entitlement Management System (VEMS) or the evaluation license. You cannot use the temporary production license when you upgrade from a NetBackup version earlier than 8.1.2.
Upgrades from NetBackup 8.1.2 or later to NetBackup 10.3 or later releases require you to download a license file from VEMS or use the temporary production license. A license is only required on the primary server. More information is available: https://www.veritas.com/support/en_US/article.100058779
Note:
For remote upgrades, the license that you enter here gets pushed to the other nodes. Your license may enable add-on products. If you push NetBackup to nodes that have an add-on product already installed, your license works for the add-on product(s).
For remote or for clustered upgrades, the following occurs during the upgrade process to verify that you have the proper credentials to perform the upgrade:
When you select a clustered system for upgrade, NetBackup determines if you have proper administrator credentials on all nodes in the cluster. If you do not have the proper credentials, the system is not added to the list.
If you have the proper credentials, you must enter a valid license to upgrade that node.
For upgrades from pre-10.3 to 10.3 or later release, if no license is provided, NetBackup uses in-built temporary production license. More information is available: https://www.veritas.com/support/en_US/article.100058779
For upgrade from 10.3 or later releases, if license is either invalid or expired, the precheck fails for remote or clustered Windows installation. The NetBackup version on that node remains unchanged and NetBackup continues to function. For a successful upgrade, you must provide a valid license.
For push installation to multiple computers in the network, the upgrade fails at the precheck if the remote computer doesn't have a valid license. NetBackup on that node is not upgraded but it continues to function.
For clustered primary server, the licenses are stored on the shared disk that is accessible only to the active node. As such, the license isn't pushed to the inactive nodes.
Select NetBackup Primary Server, browse and add licenses, and then Next to proceed to upgrade the primary server software. More information about licenses is available: https://www.veritas.com/support/en_US/article.100058779
Select NetBackup Media Server and Next to proceed to upgrade the media server software. Note that the media server upgrade does not require a license.
- (Conditional) Remote upgrades see the FIPS Compliance in NetBackup dialog.
NetBackup does not support changing the FIPS mode during upgrade. Enable FIPS mode before the upgrade if the existing NetBackup version supports FIPS. Otherwise, enable it after the upgrade.
Enabling or disabling FIPS mode during Windows remote upgrade does not change the existing FIPS mode value in the NetBackup configuration on remote hosts.
For more information about FIPS please check the NetBackup Security and Encryption Guide.
- This step applies only to Custom upgrades. For Typical upgrades, skip to the next step.
This step describes how to select and configure the NetBackup Features, NetBackup Port Numbers, and the NetBackup Services.
Java GUI Options
(Conditional: Primary server only) Depending on your upgrade, the options you see include:
Include Java GUI: Install or upgrade the NetBackup Administration Console on the specified computer.
Exclude Java GUI: Exclude the NetBackup Administration Console from the specified computer. Preexisting versions of the NetBackup Administration Console are removed.
Match Existing Configuration: Preserve the current state of the NetBackup Administration Console. The component is upgraded if it's present on the pre-upgraded systems. The NetBackup Administration Console isn't installed if it's not present on the pre-upgraded systems.
Java GUI and JRE Options
(Conditional: Media server only) Depending on your upgrade, the options you see include:
Include Java GUI and JRE: Install or upgrade the NetBackup Administration Console and the JRE on the specified computer.
Exclude Java GUI and JRE: Exclude the NetBackup Administration Console and the JRE components from the specified computer. Any preexisting NetBackup Administration Console and JRE components are removed.
Match Existing Configuration: Preserve the current state of the NetBackup Administration Console and JRE components. The components are upgraded if they are present on the pre-upgraded systems. The components are not installed if they are not present on the pre-upgraded systems.
NetBackup DirectIO Options
Depending on your upgrade, the options you see include:
Include NetBackup DirectIO: Install or upgrade the NetBackup DirectIO on the specified computer.
Exclude NetBackup DirectIO: Exclude the NetBackup DirectIO from the specified computer. Preexisting versions of the NetBackup DirectIO are removed.
Match Existing Configuration: Preserve the current state of the NetBackup DirectIO. The component is upgraded if it's present on the pre-upgraded systems. The NetBackup DirectIO isn't installed if it's not present on the pre-upgraded systems.
NetBackup Port Numbers
On this screen, you can change port numbers, if it is necessary in your configuration.
You may need to change a port number if you encounter conflicts when NetBackup and another industry product try to share the same port. Another example is if a port conflict occurs with a firewall, which may cause security issues.
To change a port number, select the port number that you want to replace and type the new number.
Click Next.
NetBackup Services
On this screen, provide the following startup account and startup type information for NetBackup services:
Privileged Account Details
Specify either Local System account or Custom account.
By default, the Local System account is selected, so that NetBackup uses the built-in system account. When this option is selected, the fields below it are disabled.
To specify a different system account:
Select Custom account.
Enter the account information in the following fields:
Domain
Username
Password
Non-Privileged Account Details
Specify either Same as the Privileged Account specified above or Local Service account.
Using a local service account involves a one-time conversion that may significantly increase the upgrade time based on your catalog size.
For more information for the non-privileged service user account, refer to: https://www.veritas.com/docs/100048220
This information is only applicable to primary server upgrades.
Startup Type
This option determines whether NetBackup services start automatically if you need to restart the NetBackup host. The default is Automatic.
To start NetBackup services manually after a restart, select Manual.
Start job-related NetBackup services after completion
By default, job-related services are set to start automatically after the upgrade has completed.
To prevent job-related services from starting automatically, click on the box to clear the check mark.
Safe Abort Option
This option determines how the upgrade proceeds if a restart is required as part of the upgrade.
If you select this option and the upgrade process determines that a restart is required, the upgrade stops. The system is then rolled back to its original state.
If you do not select this option, the upgrade proceeds even if the upgrade process determines that a restart is required.
Click Next.
- On the NetBackup Web Services screen, enter the Web Services Password.
This password is the password for the NetBackup web services user account. You must create this account before you install the primary server. More information is available.
On the NetBackup Web Services screen, specify the account type and the account details.
What types of acccounts should we use?
Select either Local or Domain (Active Directory).
Select Local if you want to associate the web server with a user and a group account that exist on the local host.
Select Domain (Active Directory) if you want to associate the web server with a user and a group account that exist on a trusted Windows domain.
What are the existing account details
Specify the information as shown:
Domain - If you chose the Domain (Active Directory) account type, specify the name of the domain to which the user and the group accounts belong.
Group - Specify the name of the group account to associate with the web server.
User - Specify the name of the user account to associate with the web server. For security reasons, do not specify a user account that has administrative privileges on the host.
Password - Specify the password of the user account in the User field.
More information is available.
- (Conditional: For media servers only) If your environment uses an external certificate authority, you receive the External Certificate screen. On the External Certificate screen, select one of the three radio buttons based on how you want to configure the external certificate authority (ECA). Depending on which one you select, you must complete different information:
Use Windows certificate store
You must enter the certificate location as Certificate Store Name\Issuer Distinguished Name\Subject Distinguished Name.
Note:
You can use the $hostname variable for any of the names in the certificate store specification. The $hostname variable evaluates at run time to the name of the local host. This option provides flexibility when you push NetBackup software to a large number of clients.
Alternatively, you can specify a comma-separated list of Windows certificate locations. For example, you can specify: MyCertStore\IssuerName1\SubjectName, MyCertStore\IssuerName2\SubjectName2, MyCertStore4\IssuerName1\SubjectName5
Then select the Certificate Revocation List (CRL) option from the radio buttons shown:
Use the CRL defined in the certificate. No additional information is required.
Use the CRL at the following path: You are prompted to provide a path to the CRL.
Do not use a CRL.
Use certificate from a file
After you select this option, specify the following:
Certificate file: This field requires you to provide the path to the certificate file and the certificate file name.
Trust store location: This field requires you to provide the path to the trust store and the trust store file name.
Private key path: This field requires you to provide the path to the private key file and the private key file name.
Passphrase file: This field requires you to provide the path of the passphrase file and the passphrase file name. This field is optional.
CRL option: Specify the correct CRL option for your environment:
Use the CRL defined in the certificate. No additional information is required.
Use the CRL at the following path: You are prompted to provide a path to the CRL.
Do not use a CRL.
Proceed without security
You receive a warning message listing potential issues. Depending on the state of the current security configuration, NetBackup may be unable to perform backups or restores until an external CA certificate has been configured.
Click Next to continue.
For remote upgrades only, on the NetBackup Remote Hosts screen, specify the hosts where you want NetBackup installed.
Windows Destination Systems
Right-click Windows Destination Computers and select from the drop-down menu, or use the following methods:
Browse
Click here to search the network for the hosts where you want to upgrade NetBackup.
On the Available Systems dialog box, select the computer to add and click Next.
On the Remote Computer Login Credentials dialog box, enter the user name, the password, and the domain of the account for NetBackup to use on the remote computers.
If you plan to upgrade multiple remote computers, click the box next to Remember User Name and Password. Selecting this option prevents the need to enter this information for each remote computer.
When you provide credentials, you select host nodes and add them to the Windows Destination Systems list. These are the nodes on which you remotely upgrade NetBackup. Make sure that you select your local host when you select systems to install.
Each time you choose a system, NetBackup performs a system check. For example, it verifies the system for a server upgrade that matches the type that you selected, as follows:
NetBackup not installed: Considers the remote to be verified.
NetBackup already installed: Compares the upgrade type on that system to the upgrade type that you request.
Invalid combination: Notifies you of the problem and disallows the choice. One example of an invalid combination is to try to install a Remote Administration Console on a remote system that is already a primary server.
Remote system not a supported platform or level: Notifies you of the problem and disallows the choice.
The upgrade procedure also verifies that you have proper administrator credentials on the remote system. If you do not have administrator credentials, the Enter Network Password screen appears, and prompts you to enter the administrator's user name and password.
Click OK and continue selecting destination systems.
This process repeats for each node that you select. You can elect to retain the user name and password. In that case, you are prompted only when the user name or password is not valid.
Note the following about the push-install process in a clustered environment:
You can upgrade NetBackup on any number of nodes. However, the clustering service sets the limit for the number of nodes in a cluster, not NetBackup.
Language packages and other NetBackup add-on products cannot be upgraded with the push method. Add-on products must be upgraded on each individual node in the cluster group. For instructions on how to upgrade these products, refer to the NetBackup documentation that supports each product.
NetBackup pushes to the other nodes only the license you enter at the beginning of the upgrade. Your license may enable add-on products. If you push NetBackup to nodes that have an add-on product already installed, your license works for that product.
Click OK.
Import
Click here to import a text file that contains a list of host names. When you create the text file, the host names must be defined in the following format:
Domain\ComputerNameAdd
Click here to add a host manually.
On the Manual Remote Computer Selection dialog box appears, enter the Domain and the Computer Name, then click OK.
On the Remote Computer Login Credentials dialog box, enter the User Name and the Password of the account to be used to perform the upgrade on the remote computers.
If you plan to add and upgrade multiple remote computers, click the box next to Remember User Name and Password. Selecting this option prevents the need to enter this information for each remote computer.
Click OK.
Remove
To remove a host from the Destination Systems list, select the host and click here.
Change
Click here to change the destination for NetBackup file installation on the selected remote host.
Click Next.
- For cluster upgrades only, on the Cluster Settings screen, review the information displayed. All information except the Public Network is displayed for informational purposes and cannot be changed. If you need to change the public network, select the correct public network from the drop-down.
Warning:
You must not select a private network that is assigned to this cluster.
Click Cluster Configuration. When the successful cluster configuration message appears, click Next.
- (Conditional: For primary servers only) Depending on the size of your catalog, you may be prompted to proceed with the Infinite retention conversion.
Upgrades from pre-NetBackup 9.0 to NetBackup 9.0 and later include the infinite expiration conversion. This conversion supports expiration dates beyond 2038. This conversion may extend the time that is required to complete the upgrade. Review the article that is shown for more information:
https://www.veritas.com/content/support/en_US/article.100048600
- On the Ready to Upgrade screen, review the Upgrade Summary that shows your selections from the previous steps.
If the ECA heath check utility indicates the Cryptographic Service Provider (CSP) or the Key Storage Provider (KSP) doesn't support the security descriptors, the upgrade cannot proceed.
This flag indicates that the provider cannot be used when NetBackup services are run in the local service user account context. Use a provider that supports security descriptors or use an administrator account to run all NetBackup services.
For more details on the service user account, see the Limitations of Windows Certificate Store support when NetBackup services are running in Local Service account context information in the NetBackup Security and Encryption Guide.
- Select one of the following options:
Click Upgrade to start the upgrade.
Click Back to view the previous screens and make any changes, then return to this screen and click Upgrade.
Click Cancel to cancel the upgrade.
After you click Upgrade, the upgrade process begins and a screen appears that shows you the upgrade progress. This process may take several minutes.
For remote or for cluster upgrades only, right-click on a system in the dialog box to see the upgrade status. Up to five upgrades occur simultaneously. When an upgrade is completed, another one begins so that a maximum of five upgrades are in progress.
- For remote upgrades only, when all remote upgrades have completed, click Finish.
- On the Upgrade Complete screen, select from the following options:
Please review the log file for details
The upgrade log files provide detailed installation information and show whether any errors occurred.
Examine the upgrade logs at the following location:
%ALLUSERSPROFILE%\Cohesity\NetBackup\InstallLogs\More information about the
InstallLogsdirectory is available: See About log file directory changes.Note:
When you perform a remote upgrade to multiple computers, this option only lets you view the logs for the local computer. Each computer that you selected for upgrade contains its own upgrade log files. To view the log files of a remote computer, open a Windows Explorer window and enter \\<COMPUTERNAME>. Then navigate to the
%ALLUSERSPROFILE%\Cohesity\ NetBackup\InstallLogs\directory.Search the upgrade logs for the following error indications:
Strings that include
Return Value 3.Important log messages that are color coded as follows:
Yellow = warning.
Red = error.
Finish
Select one of the following to complete the upgrade:
If you are done upgrading software on all servers, click the box next to Launch NetBackup Web UI now and click Finish.
The NetBackup Administration Console starts a Configuration Wizard so that you can configure your NetBackup environment.
If you have more server software to upgrade, click Finish.
You can move on to the next computer and upgrade the necessary server software.
- If any NetBackup cluster configuration is modified manually or by any external script, make sure that the change is reflected correctly in NetBackup cluster registry. Contact Cohesity Enterprise technical support if you have questions.
- The binaries are successfully installed. Proceed to the post-installation procedure.
More information is available.