THROTTLE_BANDWIDTH option for NetBackup servers
This option specifies a limit for the network bandwidth or transfer rate that NetBackup clients use on a network. The actual limiting occurs on the client side of the backup connection. This option limits only backups. Restores are unaffected. The default is that the bandwidth is not limited.
While LIMIT_BANDWIDTH associates a bandwidth or transfer rate with all client IP addresses in a range between two IP addresses, THROTTLE_BANDWIDTH is more useful in an IPv6 environment. THROTTLE_BANDWIDTH associates a bandwidth setting with a subnet description.
For example, the following subnet will get 400kbs bandwidth: 2001:db8:cb30:120::/64 400
Table: THROTTLE_BANDWIDTH information
Usage | Description |
|---|---|
Where to use | On NetBackup primary servers. |
How to use | Use the nbgetconfig and the nbsetconfig commands to view, add, or change the option. For information about these commands, see the NetBackup Commands Reference Guide. Use the following format in a single line: THROTTLE_BANDWIDTH = xxxx:xxxx:xxxx:xxxx: yyyy:yyyy:yyyy:yyyy::/nnn zzz Each THROTTLE_BANDWIDTH option specifies the bandwidth value and the IP address of the clients and networks to which it applies. The following variables are defined:
|
Bandwidth examples | The following are LIMIT_BANDWIDTH examples:
|