Robot control (robot configuration options)
The Robot control section of the dialog box specifies the type of control for the robot. The options that you configure depend on the robot type and the media server type.
Table: Robot configuration properties
| Property | Description |
|---|---|
|
|
Specifies that an NDMP host controls the robot. You must configure other options (depending on the robot type and device host type). |
|
|
Specifies that the host to which the robot is attached controls the robot. You must configure other options (depending on the robot type and device host type). |
|
|
Specifies that a host other than the device host controls the robot. You must configure other options (based on the selected robot type and device host platform). |
|
|
Specifies the name of the Sun StorageTek ACSLS host; the ACS library software resides ACSLS host. On some UNIX server platforms, this host can also be a media server. The ACS library software component can be any of the following:
Note: If the device host that has drives under ACS robotic control is a Windows server, STK LibAttach software must also be installed. Obtain the appropriate LibAttach software from STK. For compatibility information, see the NetBackup Enterprise Server and Server - Hardware and Cloud Storage Compatibility List: An overview of ACS robots is available in the NetBackup Device Configuration Guide. |
|
|
Specifies the name of the NDMP host to which the robot is attached. |
|
| |
|
|
The following applies to a Windows device host only. Specifies the name of the robot device. Click and then select a robot from the list that appears in the Devices dialog box. If the discovery operation fails to discover a robot, click in the Devices dialog box. Enter either the , , , and numbers or the device name in the next dialog box. If the browse operation fails for any other reason, a dialog box appears that lets you enter the information. Use the Windows management tools to find the Port, Bus, Target, and LUN numbers. If the browse operation does not find attached robots, an error dialog box appears. |
|
|
UNIX device host only. Specifies the device file that is used for SCSI connections. The device files are located in the /dev directory tree on the device host. To specify the robotic device file, click and then select a robotic device file from the list that appears in the Devices dialog box. If the browse operation fails to show all of the attached robots, click . Enter the path of the device file in the field. If the browse operation fails to show all of the attached robots, click . Enter the path of the device file in the next dialog box. If the browse operation does not find attached robots, an error dialog box appears. Information about how to add device files is available in the NetBackup Device Configuration Guide. |
|
|
NDMP host only. Specifies the name of the robotic device that is attached to the NDMP host. |
|
|
Windows hosts only. The Port, Bus, Target, and LUN are the SCSI coordinates for the robotic device. To specify the SCSI coordinates of the device, enter the Port, Bus, Target, and LUN. |