To turn on the appliance

1. On the front, right, side of the appliance press the Power button.
   
2. Verify that the bottom LED in all the four disk drive slots are green.
   

   The following table provides details of the disk drive LEDs.

   LED	States	Description
   1-Status LED, Top	Off Solid amber Blinking amber	No fault Disk fault A RAID rebuild is in progress
   2-Activity LED, Bottom	Off Solid green Blinking green Blinks green occasionally	Power is on and the disk has spun down Power is on but there is no disk activity Power is on and the disk is spinning up Commands are being processed

3. On the bottom, left, rear of the appliance verify that the LED on each power supply is green.
   
4. Proceed to the next section to configure remote management.