Configuring AD server settings
The network ad commands are used to configure the Active Directory (AD) client for authentication. These commands configure the Access Appliance to use AD users and groups when logging into the Access Appliance.
If the AD client's domain controller is set to refuse NTLM authentication, run the following command to disable NTLM prior to configuring the Active Directory client:
CLFS> set ntlm_auth no
To set the AD client configuration
- You can set the AD client's domain, domain controller, workgroup and domain user. To set the AD client configuration details, enter the following:
Network> ad set domain domaincontroller workgroup domainuser
domain
Active Directory domain name or Windows NT domain name
domaincontroller
Primary[,backup] domain-controller names
workgroup
Windows WORKGROUP name or NetBIOS domain name
domainuser
domain user name which is used for authentication in the domain join operation
Access Appliance displays the cluster time as well as the time on the Active Directory Domain Controller.
If NTP has been configured correctly, there will be no time skew. Otherwise, you will need to reconfigure NTP correctly.
You will be prompted to enter the password of domainuser.
To enable the AD client
- To enable the AD client to use Active Directory for authentication, enter the following:
Network> ad enable
To display the AD client configuration
- To display the AD client configuration, enter the following:
Network> ad show
To disable the AD client
- To disable the AD client so that Active Directory is not used for authentication, enter the following:
Network> ad disable
To clear the AD client configuration
- To clear the AD client configuration, enter the following:
Network> ad unset