Configuring VLAN interfaces

The virtual LAN (VLAN) feature lets you create VLAN interfaces on the Access Appliance nodes and administer them as any other VLAN interfaces. The VLAN interfaces are created using Linux support for VLAN interfaces.

Use the Network> vlan commands to view, add, or delete VLAN interfaces.

Note:

To use VLAN, your network must have VLAN-supported switches.

To display the VLAN interfaces

To display the VLAN interfaces, enter the following:
```
Network> vlan show
```

To add a VLAN interface

To add a VLAN interface, enter the following:
```
Network> vlan add device vlan_id
```
device
Specifies the VLAN interface on which the VLAN interfaces will be added.
vlan_id
Specifies the VLAN ID which the new VLAN interface uses. Valid values range from 1 to 4095.
Note:
Only one VLAN interface can be tagged on eth1 interface.

To delete a VLAN interface

To delete a VLAN interface, enter the following:
```
Network> vlan del vlan_device
```
where the vlan_device is the VLAN name from the Network> vlan show command.

Configuring VLAN interfaces

Feedback

Feedback

device	Specifies the VLAN interface on which the VLAN interfaces will be added.
vlan_id	Specifies the VLAN ID which the new VLAN interface uses. Valid values range from 1 to 4095.