To display the iSCSI targets

• To display the iSCSI targets, enter the following:

  Storage> iscsi target list

To display the iSCSI target details

• To display the iSCSI target details, enter the following:

  Storage> iscsi target listdetail target

  where target is the name of the node you want to display the details for.

  This list also shows targets discovered at discovery-address, not only manually added targets.

To add an iSCSI target

• To add an iSCSI target, enter the following:

  Storage> iscsi target add target-name portal-address

  target-name	Name of the iSCSI target at which SCSI LUNs are available. target-name should conform to the naming rules defined in RFC3721.
  portal-address	The location where the target is accessible. You can specify either an IPv4 address or an IPv6 address.

To delete an iSCSI target

• To delete an iSCSI target, enter the following:

  Storage> iscsi target del target-name
  {discovery-address|portal-address}

  target-name	Name of the iSCSI target at which SCSI LUNs are available. target-name should conform to the naming rules defined in RFC3721.
  discovery-address	Target address at which an initiator can request a list of targets using a SendTargets text request as specified in iSCSI protocol of RFC3720. If no port is specified with the discovery address, default port 3260 is used.
  portal-address	The location where the target is accessible.

To login to an iSCSI target

• To log in to an iSCSI target, enter the following:

  Storage> iscsi target login target-name 
  {discovery-address | portal-address}

  target-name	Name of the iSCSI target at which SCSI LUNs are available. target-name should conform to the naming rules defined in RFC3721.
  discovery-address	Target address at which an initiator can request a list of targets using a SendTargets text request as specified in iSCSI protocol of RFC3720. If no port is specified with the discovery address, default port 3260 is used.
  portal-address	The location where the target is accessible.

To logout from an iSCSI target

• To logout from an iSCSI target, enter the following:

  Storage> iscsi target logout target-name 
  {discovery-address | portal-address}

  target-name	Name of the iSCSI target at which SCSI LUNs are available. target-name should conform to the naming rules defined in RFC3721.
  discovery-address	Target address at which an initiator can request a list of targets using a SendTargets text request as specified in iSCSI protocol of RFC3720. If no port is specified with the discovery address, default port 3260 is used.
  portal-address	The location where the target is accessible.

To rescan targets for new LUNs

• To rescan a target for a new LUN, enter the following:

  Storage> iscsi target rescan target-name

  where target-name is the name of the iSCSI target that you want to rescan.

  You can use the Storage> iscsi target rescan command for both static targets and discovered targets.