To add an SNMP management server to receive SNMP traps

• To add an SNMP management server to receive SNMP traps, go to the Appliance CLISH and then go to Settings> Alerts. Run the SNMP Set <server name> command.

  For more details, refer to the Veritas Access Appliance Command Reference Guide.

To display the current list of SNMP management servers

• To display the current list of SNMP management servers, enter the following:

  Report> snmp show

To set the severity for SNMP traps to be sent

• To set the severity for SNMP traps to be sent, enter the following:

  Report> snmp set severity value

  where value indicates the severity for the SNMP trap to be sent.

  See About severity levels and filters.

To set the filter level of SNMP traps

• To set the filter level for SNMP traps, enter the following:

  Report> snmp set filter value

  where value indicates the filter.

  See About severity levels and filters.

To display the filter or the severity levels of SNMP traps to be sent

• To display the filter or the severity levels of SNMP traps to be sent, enter the following:

  Report> snmp get filter|severity

To export the SNMP MIB file to a given URL

1. To export the SNMP MIB file to a given URL, enter the following:

   Report> snmp exportmib url

   where url specifies the location the SNMP MIB file is exported to.

   FTP and SCP URLs are supported.

2. If the url specifies a remote directory, the default file name is access_mib.txt.